Grade : IC903

Ultra-fine carbide grain, PVD coated with high wear resistance and toughness. High speed, medium feed. Used for up to 62 HRC hardened steel, Titanium, nickel-based alloys and stainless steel.

PropertyValue
ISO Range - P/M/K(P10-P20)(M15-M25)(K10-K20)
ISO Range - N/S/H (H10-H20)(S10-S20)

PropertyValue
Grade or Coating TypePVD
Coating Layers TiAlN


Find group of specific workpiece material (opens in a new window)


Cutting Speed for: MTECSH 0250C79 1.0ISO IC903 - 5605718
ISOMaterialMaterial DesignationMaterial ConditionHardnessCutting Speed Recommendations (Vc)
P1Non-alloy steel and cast steel, free cutting steel <0.25%C.Annealed125 HB60-120 m/min
P2Non-alloy steel and cast steel, free cutting steel >=0.25%C.Annealed190 HB60-120 m/min
P3Non-alloy steel and cast steel, free cutting steel <0.55% CQuenched and tempered250 HB60-120 m/min
P4Non-alloy steel and cast steel, free cutting steel >=0.55% CAnnealed220 HB100-170 m/min
P5Non-alloy steel and cast steel, free cutting steel >=0.55% CQuenched and tempered.300 HB60-120 m/min
P6Low alloy and cast steel (less than 5% of alloying elements)Annealed200 HB60-90 m/min
P7Low alloy and cast steel (less than 5% of alloying elements)Quenched and tempered275 HB60-90 m/min
P8Low alloy and cast steel (less than 5% of alloying elements)Quenched and tempered300 HB60-90 m/min
P9Low alloy and cast steel (less than 5% of alloying elements)Quenched and tempered350 HB60-90 m/min
P10High alloyed steel, cast steel and tool steelAnnealed200 HB50-80 m/min
P11High alloyed steel, cast steel and tool steelQuenched and tempered325 HB50-80 m/min
P12Stainless steel and cast steelFerritic/martensitic200 HB70-90 m/min
P13Stainless steel and cast steelMartensitic240 HB70-90 m/min
M14Stainless steel and cast steelAustenitic, duplex180 HB60-90 m/min
K15Grey cast iron (GG)Pearlitic/ferritic180 HB40-80 m/min
K16Grey cast iron (GG)Pearlitic/martensitic260 HB40-80 m/min
K17Nodular cast iron (GGG)Ferritic160 HB40-80 m/min
K18Nodular cast iron (GGG)Pearlitic250 HB40-80 m/min
K19Malleable cast ironFerritic130 HB40-80 m/min
K20Malleable cast ironPearlitic230 HB40-80 m/min
S31High temp. alloys Fe basedAnnealed200 HB20-40 m/min
S32High temp. alloys Fe basedHardened280 HB20-40 m/min
S33High temp. alloys Ni or Co basedAnnealed250 HB20-40 m/min
S34High temp. alloys. Ni or Co basedHardened350 HB20-40 m/min
S35High temp. alloys. Ni or Co basedCast320 HB20-40 m/min
S36Titanium (pure)Pure190 HB20-40 m/min
S37Titanium alloysAlpha+beta alloys, hardened310 HB20-40 m/min

Site Map

Groove-Turn & Parting  ISO-Turning   Threading   Milling   Hole Making   Reaming   Boring   Tooling Systems   Modular Adaptations  Multifunction Tools 

Terms of Use and Legal Disclaimer   Privacy Statement
© 2024 ISCAR LTD. Manufacturer of Metalworking Tools (Iscar.com) All Rights Reserved