C#-ASHR/L : Holders with CAMFIX (ISO 26623-1 standard) exchangeable shanks for external square shank tools.
Left-hand shown
Right-hand shown
Left-hand shown
Right-hand shown
Coolant Nozzle Adjustment Instructions:
1.Open the nut by turning it approximately three-quarters of a turn counter clockwise.
2.Adjust the coolant nozzle eye so that it will direct the coolant to the area of the cutting edge.
3.Close the nut by turning it approximately three-quarters of a turn clockwise.
4.The special (WRENCH NOZZLE HP M12) key should be used.