ISCAR Cutting Tools - Metal Working Tools - Boring - Endmill Holders

Customized Items ×

Choose an item to customize and generate a quotation

FFQ4 D-12 : Fast feed face mills carrying single-sided square Inserts with 4 cutting edges.(-)Fast Feed Face Mills Carrying Single-Sided Square Inserts with 4 Cutting Edges(+)

Representative Image

Designation	DC	DCX	APMX	AE	CICT	OAL	DHUB	DCONMS	Arbor	RMPX°	MDN	MDX	CSP	MIID		IC	HAND	KAPR	CCMS	GICAT
FFQ4 D040-3-16-12	18.00	40.00	1.50	10.0	3	45.00	38.00	16.00	A	4.3	58.00	79.00	1~	FFQ4 SOMT 120516HP	0.23	12.70~	R~	9.0~	FDA02G1600H$07~	3309042
FFQ4 D040-4-16-12	18.00	40.00	1.50	10.0	4	45.00	38.00	16.00	A	4.3	58.00	79.00	1~	FFQ4 SOMT 120516HP	0.22	12.70~	R~	9.0~	FDA02G1600H$07~	3107336
FFQ4 D050-4-22-12	28.00	50.00	1.50	10.0	4	50.00	48.00	22.00	A	2.7	78.00	99.00	1~	FFQ4 SOMT 120516HP	0.38	12.70~	R~	9.0~	FDA02G2200H$07~	3309041
FFQ4 D050-5-22-12	28.00	50.00	1.50	10.0	5	50.00	48.00	22.00	A	2.7	78.00	99.00	1~	FFQ4 SOMT 120516HP	0.37	12.70~	R~	9.0~	FDA02G2200H$07~	3107337
FFQ4 D052-5-22-12	29.00	52.00	1.50	10.0	5	50.00	48.00	22.00	A	2.5	81.00	103.00	1~	FFQ4 SOMT 120516HP	0.39	12.70~	R~	9.0~	FDA02G2200H$07~	3329567
FFQ4 D063-6-22-12	41.00	63.00	1.50	10.0	6	50.00	48.00	22.00	A	1.8	104.00	125.00	1~	FFQ4 SOMT 120516HP	0.50	12.70~	R~	9.0~	FDA02G2200H$07~	3107338
FFQ4 D066-6-27-12	43.00	66.00	1.50	10.0	6	50.00	60.00	27.00	A	1.6	109.00	131.00	1~	FFQ4 SOMT 120516HP	0.65	12.70~	R~	9.0~	FDA02G2700H$07~	3329630
FFQ4 D080-7-27-12	58.00	80.00	1.50	10.0	7	50.00	60.00	27.00	A	1.2	138.00	159.00	1~	FFQ4 SOMT 120516HP	0.84	12.70~	R~	9.0~	FDA02G2700H$07~	3107339
FFQ4 D100-8-32-12	78.00	100.00	1.50	10.0	8	50.00	78.00	32.00	B	0.9	178.00	199.00	1~	FFQ4 SOMT 120516HP	1.30	12.70~	R~	9.0~	FDA02G3200H$07~	3107340
FFQ4 D125-10-40-12	103.00	125.00	1.50	10.0	10	63.00	92.00	40.00	B	0.7	228.00	249.00	1~	FFQ4 SOMT 120516HP	2.17	12.70~	R~	9.0~	FDA02G4000H$07~	3331234

To generate a straight surface without cusps, the width of cut must not exceed DC
Radius for programming: for insert SOMT 3 mm, for insert SOMW 4 mm
When mounting insert SOMW, APMX=1.2 mm
For slot milling or machining with high tool overhang, the maximum depth of cut should be reduced by 50%
For cutting conditions click on "More info"

Boring
Main Application

Endmill Holders
Sub Application

Site Map

Boring Main Application

Endmill Holders Sub Application

Site Map

Boring
Main Application

Endmill Holders
Sub Application