GHGL 20-2 | | 0 | 0.40 | 2.40 | 34.0 | 17.00~ | 20.0 | 20.0 | 20.0 | 120.00 | 33.0 | 19.20 | 1.70 | - | L | -~ | 2.40~ | VKT01A2020~ | ~ | ~ | ~ | SQUARE~ | 2800609 | In the case of inserts with CW<2 mm, tool pocket should be ground to 0.3 mm thinner than the insert's grooving width. | 0 |
GHGR 20-2 | | 0 | 0.40 | 2.40 | 34.0 | 17.00~ | 20.0 | 20.0 | 20.0 | 120.00 | 33.0 | 19.20 | 1.70 | - | R | -~ | 2.40~ | VKT01A2020~ | ~ | ~ | ~ | SQUARE~ | 2800608 | In the case of inserts with CW<2 mm, tool pocket should be ground to 0.3 mm thinner than the insert's grooving width. | 0 |
GHGL 25-2 | | 0 | 0.40 | 2.40 | 34.0 | 17.00~ | 25.0 | 25.0 | 25.0 | 140.00 | 33.0 | 24.20 | 1.70 | - | L | -~ | 2.40~ | VKT01A2525~ | ~ | ~ | ~ | SQUARE~ | 2800605 | In the case of inserts with CW<2 mm, tool pocket should be ground to 0.3 mm thinner than the insert's grooving width. | 0 |
GHGR 25-2 | | 0 | 0.40 | 2.40 | 34.0 | 17.00~ | 25.0 | 25.0 | 25.0 | 140.00 | 33.0 | 24.20 | 1.70 | - | R | -~ | 2.40~ | VKT01A2525~ | ~ | ~ | ~ | SQUARE~ | 2800604 | In the case of inserts with CW<2 mm, tool pocket should be ground to 0.3 mm thinner than the insert's grooving width. | 0 |