T490 LNAT 1306 PN-W | | 0 | 6.65 | 14.20 | 0.50 | 1.00 | 4.80 | 13.10 | 0.12 | 0.18 | 3. | 2~ | R~ | -~ | L~ | 0.0~ | ~ | 2~ | ~ | ~ | IC808 ~ | 3~ | ~ | ~ | 2~ | 13~ | ~ | 1~ | Steel~ | Stainless Steel~ | Cast Iron~ | Hard Materials~ | Superalloys and titanium~ | Carbide~ | TiAlN+AlTiN+TiN ~ | 5667702 | A wiper insert with 2 cutting edges, for finishing only | 1 | IC808 |
T490 LNAR 1306PN-R | | 0 | 6.65 | 13.81 | 12.77 | 0.80 | 2.57 | 13.00 | 0.08 | 0.20 | 1. | 4~ | R~ | ~ | L~ | 0.0~ | ~ | 4~ | ~ | ~ | IC330 ~ | 3~ | ~ | ~ | 2~ | 13~ | ~ | 0~ | Steel~ | Stainless Steel~ | | | Superalloys and titanium~ | Carbide~ | TiCN+TiN ~ | 5606390 | For low carbon steel (ISO P, ISCAR mat. Group No. 1 and 2) | 1 | IC330 |
T490 LNMT 1306PNTR | | 0 | 6.65 | 13.74 | 12.50 | 0.80 | 2.57 | 13.05 | 0.10 | 0.25 | 1. | 4~ | R~ | -~ | L~ | 0.0~ | ~ | 4~ | ~ | ~ | DT7150~ | 3~ | ~ | ~ | 2~ | 13~ | ~ | 0~ | Steel~ | Stainless Steel~ | Cast Iron~ | Hard Materials~ | Superalloys and titanium~ | Carbide~ | AlTiCrN+TiN ~ | 5695747 | | 14 | IC882 IC330 IC328 IC845 IC840 IC830 IC928 IC5500 IC380 IC808 IC810 IC5400 DT7150 IC5100 |
T490 LNHT 1306PNTR | | 0 | 6.65 | 13.80 | 12.50 | 0.85 | 2.57 | 13.05 | 0.10 | 0.20 | 1. | 4~ | R~ | -~ | L~ | 0.0~ | ~ | 4~ | ~ | ~ | DT7150~ | 3~ | ~ | ~ | 2~ | 13~ | ~ | 0~ | Steel~ | Stainless Steel~ | Cast Iron~ | Hard Materials~ | Superalloys and titanium~ | Carbide~ | AlTiCrN+TiN ~ | 5606062 | | 6 | IC330 IC830 IC808 IC810 DT7150 IC5100 |
T490 LNHT 1306PNTL | | 0 | 6.65 | 13.81 | 12.50 | 0.85 | 2.57 | 13.05 | 0.10 | 0.20 | 1. | 4~ | L~ | -~ | L~ | 0.0~ | ~ | 4~ | ~ | ~ | IC808 ~ | 3~ | ~ | ~ | 2~ | 13~ | ~ | 0~ | Steel~ | Stainless Steel~ | Cast Iron~ | Hard Materials~ | Superalloys and titanium~ | Carbide~ | AlTiCrN+TiN ~ | 5683580 | Left-hand insert used on left-hand cartridges or on special left-hand cutters | 3 | IC830 IC808 IC810 |
T490 LNMT 1306PNTL | | 0 | 6.65 | 13.80 | 12.50 | 0.85 | 2.57 | 13.05 | 0.10 | 0.20 | 1. | 4~ | L~ | -~ | L~ | 0.0~ | ~ | 4~ | ~ | ~ | IC830 ~ | 3~ | ~ | ~ | 2~ | 13~ | ~ | 0~ | Steel~ | Stainless Steel~ | | | Superalloys and titanium~ | Carbide~ | AlTiN+TiN ~ | 3304170 | Left-hand insert used on left-hand cartridges or on special left-hand cutters | 1 | IC830 |
T490 LNMT 1306PNTR-CS | | 0 | 6.65 | 13.74 | 12.50 | 0.85 | 2.57 | 13.05 | 0.10 | 0.20 | 1. | 4~ | R~ | -~ | L~ | 0.0~ | ~ | 4~ | ~ | ~ | IC330 ~ | 3~ | ~ | ~ | 2~ | 13~ | ~ | 0~ | Steel~ | Stainless Steel~ | Cast Iron~ | | Superalloys and titanium~ | Carbide~ | AlTiCrN+TiN ~ | 5666822 | Chip splitting insert | 4 | IC330 IC830 IC810 IC5400 |
T490 LNHT 1306PN-R-PL | | 0 | 6.65 | 13.81 | 12.50 | 0.85 | 2.57 | 13.05 | 0.10 | 0.20 | 1. | 4~ | R~ | -~ | L~ | 0.0~ | ~ | 4~ | ~ | ~ | IC330 ~ | 3~ | ~ | ~ | 2~ | 13~ | ~ | 0~ | Steel~ | Stainless Steel~ | Cast Iron~ | Hard Materials~ | Superalloys and titanium~ | Carbide~ | Al2O3 ~ | 5606365 | Positive rake face, for stainless steel and high temperature alloys | 6 | IC882 IC330 IC716 IC830 IC5820 IC808 |
T490 LNHT 1306PNR-PLS | | 0 | 6.65 | 13.81 | 12.50 | 0.85 | 2.57 | 13.05 | 0.10 | 0.20 | 1. | 4~ | R~ | -~ | L~ | 0.0~ | ~ | 4~ | ~ | ~ | IC830 ~ | 3~ | ~ | ~ | 2~ | 13~ | ~ | 0~ | Steel~ | Stainless Steel~ | | | Superalloys and titanium~ | Carbide~ | AlTiN+TiN ~ | 5668171 | Positive rake angle for soft and gummy materials | 1 | IC830 |
T490 LNHT 1306PNTR-RD | | 0 | 6.65 | 13.81 | 12.50 | 0.85 | 2.57 | 13.05 | 0.10 | 0.20 | 1. | 4~ | R~ | 2.8~ | L~ | 0.0~ | ~ | 4~ | ~ | ~ | IC808 ~ | 3~ | ~ | ~ | 2~ | 13~ | ~ | 0~ | Steel~ | Stainless Steel~ | Cast Iron~ | Hard Materials~ | Superalloys and titanium~ | Carbide~ | AlTiCrN+TiN ~ | 5682020 | Used for ramping down applications with 32 mm and larger tools | 3 | IC830 IC808 IC810 |
T490 LNMT1306PNR-RD-CS | | 0 | 6.65 | 13.74 | 12.50 | 0.85 | 2.57 | 13.05 | 0.10 | 0.20 | 1. | 4~ | R~ | 0.5~ | L~ | 0.0~ | ~ | 4~ | ~ | ~ | IC830 ~ | 3~ | ~ | ~ | 2~ | 13~ | ~ | 0~ | Steel~ | Stainless Steel~ | | | Superalloys and titanium~ | Carbide~ | AlTiN+TiN ~ | 3315955 | Used for ramping down and chip splitting applications with 40 mm and larger tools | 1 | IC830 |
T490 LNMT1306PNR-RDPCS | | 0 | 6.65 | 13.75 | 12.50 | 0.85 | 1.20 | 13.05 | 0.10 | 0.20 | 1. | 4~ | R~ | 0.5~ | L~ | 0.0~ | ~ | 4~ | ~ | ~ | IC840 ~ | 3~ | ~ | ~ | 2~ | 13~ | ~ | 0~ | | Stainless Steel~ | | | Superalloys and titanium~ | Carbide~ | AlTiN+TiAlSiN+TiSiN ~ | 3309428 | Positive rake face, for stainless steel and high temp. alloys; used for ramping down and chip splitting applications | 1 | IC840 |
T490 LNMT1306PNR-RDPL | | 0 | 6.44 | 13.74 | 12.50 | 0.85 | 1.20 | 13.05 | 0.10 | 0.20 | 1. | 4~ | R~ | -~ | L~ | 0.0~ | ~ | 4~ | ~ | ~ | IC840 ~ | 3~ | ~ | ~ | 2~ | 13~ | ~ | 0~ | | Stainless Steel~ | | | Superalloys and titanium~ | Carbide~ | AlTiN+TiAlSiN+TiSiN ~ | 3309426 | Positive rake face, for stainless steel and high temperature alloys with limited ramp down capability | 1 | IC840 |
T490 LNHT 130604PNTR | | 0 | 6.65 | 13.81 | 12.50 | 0.40 | 3.05 | 12.88 | 0.10 | 0.20 | 1. | 4~ | R~ | -~ | L~ | 0.0~ | ~ | 4~ | ~ | ~ | IC830 ~ | 3~ | ~ | ~ | 2~ | 13~ | ~ | 0~ | Steel~ | Stainless Steel~ | | | Superalloys and titanium~ | Carbide~ | AlTiN+TiN ~ | 5683372 | | 1 | IC830 |
T490 LNHT 130612PNTR | | 0 | 6.65 | 13.81 | 12.50 | 1.20 | 1.90 | 13.00 | 0.10 | 0.20 | 1. | 4~ | R~ | -~ | L~ | 0.0~ | ~ | 4~ | ~ | ~ | IC810 ~ | 3~ | ~ | ~ | 2~ | 13~ | ~ | 0~ | Steel~ | | Cast Iron~ | | | Carbide~ | AlTiCrN+TiN ~ | 5680609 | | 1 | IC810 |
T490 LNHT 130616PNTL | | 0 | 6.65 | 13.81 | 12.50 | 1.60 | 1.73 | 12.88 | 0.10 | 0.20 | 1. | 4~ | L~ | -~ | L~ | 0.0~ | ~ | 4~ | ~ | ~ | IC830 ~ | 3~ | ~ | ~ | 2~ | 13~ | ~ | 0~ | Steel~ | Stainless Steel~ | | | Superalloys and titanium~ | Carbide~ | AlTiN+TiN ~ | 5607350 | Left-hand insert used on left-hand cartridges or on special left-hand cutters | 1 | IC830 |
T490 LNHT 130616PNTR | | 0 | 6.65 | 13.81 | 12.50 | 1.60 | 1.73 | 12.88 | 0.10 | 0.20 | 1. | 4~ | R~ | -~ | L~ | 0.0~ | ~ | 4~ | ~ | ~ | IC330 ~ | 3~ | ~ | ~ | 2~ | 13~ | ~ | 0~ | Steel~ | Stainless Steel~ | Cast Iron~ | Hard Materials~ | Superalloys and titanium~ | Carbide~ | AlTiN+TiN ~ | 5607492 | | 3 | IC330 IC830 IC808 |
T490 LNMT 130616PNTR | | 0 | 6.65 | 13.75 | 12.50 | 1.60 | 1.82 | 12.88 | 0.10 | 0.25 | 1. | 4~ | R~ | -~ | L~ | 0.0~ | ~ | 4~ | ~ | ~ | IC810 ~ | 3~ | ~ | ~ | 2~ | 13~ | ~ | 0~ | Steel~ | Stainless Steel~ | Cast Iron~ | | Superalloys and titanium~ | Carbide~ | AlTiCrN+TiN ~ | 5684015 | | 2 | IC830 IC810 |
T490 LNHT 130624PNTL | | 0 | 6.65 | 13.80 | 12.50 | 2.40 | 1.30 | 12.50 | 0.10 | 0.20 | 1. | 4~ | L~ | -~ | L~ | 0.0~ | ~ | 4~ | ~ | ~ | IC830 ~ | 3~ | ~ | ~ | 2~ | 13~ | ~ | 0~ | Steel~ | Stainless Steel~ | | | Superalloys and titanium~ | Carbide~ | AlTiN+TiN ~ | 5607351 | Left-hand insert used on left-hand cartridges or on special left-hand cutters | 1 | IC830 |
T490 LNHT 130624PNTR | | 0 | 6.65 | 13.80 | 12.50 | 2.40 | 1.30 | 12.50 | 0.10 | 0.20 | 1. | 4~ | R~ | -~ | L~ | 0.0~ | ~ | 4~ | ~ | ~ | IC330 ~ | 3~ | ~ | ~ | 2~ | 13~ | ~ | 0~ | Steel~ | Stainless Steel~ | Cast Iron~ | Hard Materials~ | Superalloys and titanium~ | Carbide~ | AlTiCrN+TiN ~ | 5607493 | | 4 | IC330 IC830 IC808 IC810 |
T490 LNMT 130624PNTR | | 0 | 6.65 | 13.74 | 12.50 | 2.40 | 1.13 | 12.66 | 0.10 | 0.20 | 1. | 4~ | R~ | -~ | L~ | 0.0~ | ~ | 4~ | ~ | ~ | IC810 ~ | 3~ | ~ | ~ | 2~ | 13~ | ~ | 0~ | Steel~ | Stainless Steel~ | Cast Iron~ | | Superalloys and titanium~ | Carbide~ | AlTiCrN+TiN ~ | 5666836 | | 2 | IC830 IC810 |
T490 LNHT 130631PNTL | | 0 | 6.65 | 13.81 | 12.50 | 3.10 | 0.62 | 12.37 | 0.10 | 0.20 | 1. | 4~ | L~ | -~ | L~ | 0.0~ | ~ | 4~ | ~ | ~ | IC830 ~ | 3~ | ~ | ~ | 2~ | 13~ | ~ | 0~ | Steel~ | Stainless Steel~ | | | Superalloys and titanium~ | Carbide~ | AlTiN+TiN ~ | 5607352 | Left-hand insert used on left-hand cartridges or on special left-hand cutters | 1 | IC830 |
T490 LNHT 130631PNTR | | 0 | 6.65 | 13.81 | 12.50 | 3.10 | 0.62 | 12.37 | 0.10 | 0.20 | 1. | 4~ | R~ | -~ | L~ | 0.0~ | ~ | 4~ | ~ | ~ | IC330 ~ | 3~ | ~ | ~ | 2~ | 13~ | ~ | 0~ | Steel~ | Stainless Steel~ | Cast Iron~ | Hard Materials~ | Superalloys and titanium~ | Carbide~ | AlTiN+TiN ~ | 5607494 | | 3 | IC330 IC830 IC808 |
T490 LNMT 130631PNTR | | 0 | 6.65 | 13.75 | 12.50 | 3.10 | 0.60 | 12.45 | 0.10 | 0.25 | 1. | 4~ | R~ | -~ | L~ | 0.0~ | ~ | 4~ | ~ | ~ | IC330 ~ | 3~ | ~ | ~ | 2~ | 13~ | ~ | 0~ | Steel~ | Stainless Steel~ | | | Superalloys and titanium~ | Carbide~ | AlTiN+TiN ~ | 5607269 | | 2 | IC330 IC830 |
T490 LNHT 130640PNTR | | 0 | 6.65 | 13.63 | 12.50 | 4.00 | 0.40 | 12.60 | 0.10 | 0.20 | 2. | 2~ | R~ | -~ | L~ | 0.0~ | ~ | 2~ | ~ | ~ | IC330 ~ | 3~ | ~ | ~ | 2~ | 13~ | ~ | 0~ | Steel~ | Stainless Steel~ | Cast Iron~ | Hard Materials~ | Superalloys and titanium~ | Carbide~ | AlTiN+TiN ~ | 5668136 | With 2 cutting edges | 3 | IC330 IC830 IC808 |
T490 LNMT 130640PNTR | | 0 | 6.65 | 13.63 | 12.50 | 4.00 | 1.80 | 12.60 | 0.10 | 0.20 | 2. | 4~ | R~ | -~ | L~ | 0.0~ | ~ | 4~ | ~ | ~ | IC830 ~ | 3~ | ~ | ~ | 2~ | 13~ | ~ | 0~ | Steel~ | Stainless Steel~ | | | Superalloys and titanium~ | Carbide~ | AlTiN+TiN ~ | 5666837 | With 2 cutting edges | 1 | IC830 |
T490 LNHT 130650PNTR | | 0 | 6.65 | 13.63 | 12.50 | 5.00 | 0.40 | 12.45 | 0.10 | 0.20 | 2. | 2~ | R~ | -~ | L~ | 0.0~ | ~ | 2~ | ~ | ~ | IC330 ~ | 3~ | ~ | ~ | 2~ | 13~ | ~ | 0~ | Steel~ | Stainless Steel~ | Cast Iron~ | | Superalloys and titanium~ | Carbide~ | AlTiCrN+TiN ~ | 5667055 | With 2 cutting edges | 3 | IC330 IC830 IC810 |
T490 LNMT 130650PNTR | | 0 | 6.65 | 13.63 | 12.50 | 5.00 | 0.80 | 12.36 | 0.10 | 0.20 | 2. | 4~ | R~ | -~ | L~ | 0.0~ | ~ | 4~ | ~ | 0.00~ | IC830 ~ | 3~ | ~ | 0.00~ | 2~ | 13~ | ~ | 0~ | Steel~ | Stainless Steel~ | | | Superalloys and titanium~ | Carbide~ | AlTiN+TiN ~ | 5666838 | With 2 cutting edges | 1 | IC830 |
T490 LNHT 130660PNTR | | 0 | 6.65 | 13.63 | 12.50 | 6.00 | 0.70 | 12.30 | 0.10 | 0.25 | 2. | 2~ | R~ | -~ | L~ | 0.0~ | ~ | 2~ | ~ | ~ | IC808 ~ | 3~ | ~ | ~ | 2~ | 13~ | ~ | 0~ | Steel~ | Stainless Steel~ | Cast Iron~ | Hard Materials~ | Superalloys and titanium~ | Carbide~ | AlTiN+TiN ~ | 5683600 | With 2 cutting edges | 2 | IC830 IC808 |
T490 LNHT 130664PNTR | | 0 | 6.65 | 13.63 | 12.50 | 6.35 | 0.43 | 12.28 | 0.10 | 0.20 | 2. | 2~ | R~ | -~ | L~ | 0.0~ | ~ | 2~ | ~ | ~ | IC330 ~ | 3~ | ~ | ~ | 2~ | 13~ | ~ | 0~ | Steel~ | Stainless Steel~ | Cast Iron~ | Hard Materials~ | Superalloys and titanium~ | Carbide~ | AlTiN+TiN ~ | 5606076 | With 2 cutting edges | 3 | IC330 IC830 IC808 |
T490 LNMT 130664PNTR | | 0 | 6.65 | 13.63 | 12.50 | 6.40 | 0.60 | 12.28 | 0.10 | 0.20 | 2. | 4~ | R~ | -~ | L~ | 0.0~ | ~ | 4~ | ~ | ~ | IC830 ~ | 3~ | ~ | ~ | 2~ | 13~ | ~ | 0~ | Steel~ | Stainless Steel~ | | | Superalloys and titanium~ | Carbide~ | AlTiN+TiN ~ | 5666839 | With 2 cutting edges | 1 | IC830 |