DGFH 32-1.4 | | 0 | 32.0 | 1.40 | 1.40 | 1.00 | 2.4 | 150.00 | 24.8 | 26.0 | ~ | DGN 1402J | N~ | 1.40~ | BLADE~ | 2301449 | | 0 |
DGFH 32-2 | | 0 | 32.0 | 1.90 | 2.50 | - | 1.8 | 150.00 | 24.8 | 39.0 | ~ | DGN 2002C | N~ | 2.50~ | BLADE~ | 2301244 | For CUTDIA 50 mm, use single-ended insert (should be modified by the user) | 0 |
DGFH 32-3 | | 0 | 32.0 | 3.00 | 3.18 | - | 2.4 | 150.00 | 24.8 | 39.0 | ~ | DGN 3102C | N~ | 3.18~ | BLADE~ | 2301245 | For CUTDIA 50 mm, use single-ended insert (should be modified by the user) | 0 |
DGFH 32C-3 | | 0 | 32.0 | 3.00 | 3.18 | - | 2.4 | 150.00 | 24.8 | 39.0 | 1~ | DGNC 3102C | N~ | 3.18~ | BLADE~ | 2301745 | Blades with frontal coolant holes (JET-CUT) @For CUTDIA 50 mm, use single-ended insert (should be modified by the user) | 0 |
DGFH 32-4 | | 0 | 32.0 | 4.00 | 4.00 | - | 3.2 | 150.00 | 24.8 | 100.0 | ~ | DGN 4003C | N~ | 4.00~ | BLADE~ | 2301246 | | 0 |
DGFH 32C-4 | | 0 | 32.0 | 4.00 | 4.00 | - | 3.2 | 150.00 | 24.8 | 69.0 | 1~ | DGNC 4003C | N~ | 4.00~ | BLADE~ | 2301770 | These blades are suitable for turning, using GRIP 4 inserts @ Blades with frontal coolant holes (JET-CUT) | 0 |
DGFH 32-5 | | 0 | 32.0 | 5.00 | 5.00 | - | 4.0 | 150.00 | 24.8 | 120.0 | ~ | DGN 5003C | N~ | 5.00~ | BLADE~ | 2301247 | | 0 |
DGFH 32-6 | | 0 | 32.0 | 6.00 | 6.35 | - | 5.2 | 150.00 | 24.8 | 120.0 | ~ | DGN 6303C | N~ | 6.35~ | BLADE~ | 2301268 | | 0 |