ISCAR Cutting Tools - Metal Working Tools - Milling - FLEXFIT

Customized Items ×

Choose an item to customize and generate a quotation

HTP-M-LN10 : TANGPLUNGE, Side plungers with FLEXFIT connection carrying tangentially clamped inserts with 4 cutting edges. 8 mm side plunging capacity and 3 mm maximum face milling DOC. Provideexcellent side wall surface finish and a flat bottom.(-)Side Plungers with FLEXFIT Threaded Connection Carrying Tangentially Clamped Inserts with 4 Cutting Edges(+)

Representative Image

Designation	DC	AE	APMX	CICT	LF	OAL	DCONMS	THSZMS	DRVS	HAND	MIID	CCMS	KAPR	TQ_3		CSP	RMPX°	ZEFF	GICAT
HTP D025-2-M12-LN10	25.00	7.0	3.00	2	35.00	57.00	21.00	M12	17.0	R~	HTP LNAR 1006 FR-P	SAI02C0120$$$$~	90.0~	33	0.09	1~	0.0~	2~	3105018
HTP D032-3-M16-LN10	32.00	8.0	3.00	3	35.00	60.00	29.00	M16	25.0	R~	HTP LNAR 1006 FR-P	SAI02C0160$$$$~	90.0~	40	0.16	1~	0.0~	3~	3105019
HTP D035-3-M16-LN10	35.00	8.0	3.00	3	43.00	68.00	29.00	M16	25.0	R~	HTP LNAR 1006 FR-P	SAI02C0160$$$$~	90.0~	40	0.22	1~	0.0~	3~	3105121
HTP D042-4-M16-LN10	42.00	8.0	3.00	4	43.00	68.00	29.00	M16	25.0	R~	HTP LNAR 1006 FR-P	SAI02C0160$$$$~	90.0~	40	0.26	1~	0.0~	4~	3105122

For adaptation, click on "More Info".
When mounting items with FLEXFIT threaded adaptation to their holders, the mating surfaces and threaded areas must be thoroughly cleaned. Apply appropriate tightening torque to eliminate a gap between the mating faces. Estimated torque values are specified in the TQ_3 parameter

Milling
Main Application

FLEXFIT
Sub Application

Site Map

Milling Main Application

FLEXFIT Sub Application

Site Map

Milling
Main Application

FLEXFIT
Sub Application