HSK A63WH-ASHR/L-1 : Square shank tool adapters with HSK exchangeable shanks, for turn-mill machines.
Left-hand shown
Right-hand shown
Left-hand shown
Right-hand shown
Coolant Nozzle Adjustment Instructions: 1.
Open the nut by turning it approximately three-quarters of a turn counter clockwise.
2.
Adjust the coolant nozzle eye so that it will direct the coolant to the area of the cutting edge.
3.
Close the nut by turning it approximately three-quarters of a turn clockwise.
4.
The special (WRENCH NOZZLE HP M12) key should be used.