DGFH 26-1.4 | | 0 | 1.024 | .055 | .055 | .0394 | .094 | 4.331 | .843 | 1.024 | ~ | DGN 1402J | N~ | .0551~ | BLADE~ | 2395946 | | 0 |
DGFH 26-2 | | 0 | 1.024 | .075 | .098 | - | .063 | 4.331 | .843 | 1.535 | ~ | DGN 2002C | N~ | .0984~ | BLADE~ | 2301241 | For CUTDIA 1.97", use single-ended insert (should be modified by the user) | 0 |
DGFH 26-3 | | 0 | 1.024 | .118 | .125 | - | .094 | 4.331 | .843 | 1.535 | ~ | DGN 3102C | N~ | .1252~ | BLADE~ | 2301242 | For CUTDIA 1.97", use single-ended insert (should be modified by the user) | 0 |
DGFH 26C-3 | | 0 | 1.024 | .118 | .125 | - | .094 | 4.331 | .843 | 1.535 | 1~ | DGNC 3102C | N~ | .1252~ | BLADE~ | 2301928 | Blades with frontal coolant holes (JET-CUT) @For CUTDIA 1.97", use single-ended insert (should be modified by the user) | 0 |
DGFH 26-4 | | 0 | 1.024 | .157 | .157 | - | .126 | 4.331 | .843 | 3.150 | ~ | DGN 4003C | N~ | .1575~ | BLADE~ | 2301243 | | 0 |
DGFH 32-1.4 | | 0 | 1.260 | .055 | .055 | .0394 | .094 | 5.906 | .976 | 1.024 | ~ | DGN 1402J | N~ | .0551~ | BLADE~ | 2301449 | | 0 |
DGFH 32-2 | | 0 | 1.260 | .075 | .098 | - | .071 | 5.906 | .976 | 1.535 | ~ | DGN 2002C | N~ | .0984~ | BLADE~ | 2301244 | For CUTDIA 1.97", use single-ended insert (should be modified by the user) | 0 |
DGFH 32-3 | | 0 | 1.260 | .118 | .125 | - | .094 | 5.906 | .976 | 1.535 | ~ | DGN 3102C | N~ | .1252~ | BLADE~ | 2301245 | For CUTDIA 1.97", use single-ended insert (should be modified by the user) | 0 |
DGFH 32C-3 | | 0 | 1.260 | .118 | .125 | - | .094 | 5.906 | .976 | 1.535 | 1~ | DGNC 3102C | N~ | .1252~ | BLADE~ | 2301745 | Blades with frontal coolant holes (JET-CUT) @For CUTDIA 1.97", use single-ended insert (should be modified by the user) | 0 |
DGFH 32-4 | | 0 | 1.260 | .157 | .157 | - | .126 | 5.906 | .976 | 3.937 | ~ | DGN 4003C | N~ | .1575~ | BLADE~ | 2301246 | | 0 |
DGFH 32C-4 | | 0 | 1.260 | .157 | .157 | - | .126 | 5.906 | .976 | 2.717 | 1~ | DGNC 4003C | N~ | .1575~ | BLADE~ | 2301770 | These blades are suitable for turning, using GRIP 4 inserts @ Blades with frontal coolant holes (JET-CUT) | 0 |
DGFH 32-5 | | 0 | 1.260 | .197 | .197 | - | .157 | 5.906 | .976 | 4.724 | ~ | DGN 5003C | N~ | .1969~ | BLADE~ | 2301247 | | 0 |
DGFH 32-6 | | 0 | 1.260 | .236 | .250 | - | .205 | 5.906 | .976 | 4.724 | ~ | DGN 6303C | N~ | .2500~ | BLADE~ | 2301268 | | 0 |
DGFH 45-3 | | 0 | 1.772 | .118 | .125 | - | .094 | 8.858 | 1.496 | 6.299 | ~ | DGN 3102C | N~ | .1252~ | BLADE~ | 2301322 | | 0 |
DGFH 45-4 | | 0 | 1.772 | .157 | .161 | - | .126 | 8.858 | 1.496 | 6.299 | ~ | DGN 4003C | N~ | .1614~ | BLADE~ | 2301323 | | 0 |
DGFH 45-5 | | 0 | 1.772 | .189 | .197 | - | .157 | 8.858 | 1.496 | 6.299 | ~ | DGN 5003C | N~ | .1969~ | BLADE~ | 2301324 | | 0 |
DGFH 45-6 | | 0 | 1.772 | .236 | .252 | - | .205 | 8.858 | 1.496 | 6.299 | ~ | DGN 6303C | N~ | .2520~ | BLADE~ | 2301325 | | 0 |