Grade : IC1007

A tough submicron substrate, PVD coated grade. Suitable for threading heat resistant alloys,austenitic stainless steel and hard steel at low to medium cutting speeds.

PropertyValue
ISO Range - P/M/K(P10-P30)(M05-M20)(K20-K40)
ISO Range - N/S/H (H05-H15)(S05-S20)

PropertyValue
Grade or Coating TypePVD
Coating Layers TiAlN


Find group of specific workpiece material (opens in a new window)


Cutting Speed for: 16ERM 8 NPT IC1007 - 3318664
ISOMaterialMaterial DesignationMaterial ConditionHardnessCutting Speed Recommendations (Vc)
P1Non-alloy steel and cast steel, free cutting steel <0.25%C.Annealed125 HB360-590 sfm
P2Non-alloy steel and cast steel, free cutting steel >=0.25%C.Annealed190 HB330-560 sfm
P3Non-alloy steel and cast steel, free cutting steel <0.55% CQuenched and tempered250 HB330-560 sfm
P4Non-alloy steel and cast steel, free cutting steel >=0.55% CAnnealed220 HB310-525 sfm
P5Non-alloy steel and cast steel, free cutting steel >=0.55% CQuenched and tempered.300 HB295-510 sfm
P6Low alloy and cast steel (less than 5% of alloying elements)Annealed200 HB280-475 sfm
P7Low alloy and cast steel (less than 5% of alloying elements)Quenched and tempered275 HB260-445 sfm
P8Low alloy and cast steel (less than 5% of alloying elements)Quenched and tempered300 HB245-425 sfm
P9Low alloy and cast steel (less than 5% of alloying elements)Quenched and tempered350 HB230-395 sfm
P10High alloyed steel, cast steel and tool steelAnnealed200 HB215-360 sfm
P11High alloyed steel, cast steel and tool steelQuenched and tempered325 HB210-360 sfm
P12Stainless steel and cast steelFerritic/martensitic200 HB245-410 sfm
P13Stainless steel and cast steelMartensitic240 HB230-375 sfm
M14Stainless steel and cast steelAustenitic, duplex180 HB285-490 sfm
N21Aluminum-wrought alloysNot hardenable60 HB345-1035 sfm
N22Aluminum-wrought alloysHardenable100 HB280-855 sfm
N23Aluminum-cast alloys <=12% SiNot hardenable75 HB345-1035 sfm
N24Aluminum-cast alloys <=12% SiHardenable90 HB295-920 sfm
N25Aluminum-cast alloys >12% SiHigh temperature130 HB180-560 sfm
N26Copper alloys >1% PbFree cutting110 HB215-640 sfm
N27Copper alloysBrass90 HB215-640 sfm
N28Copper alloysElectrolytic copper100 HB165-490 sfm
N29Non metallic.Duro& fiber plastics310-985 sfm
N30Non metallicHard rubber310-985 sfm
S31High temp. alloys Fe basedAnnealed200 HB80-130 sfm
S32High temp. alloys Fe basedHardened280 HB65-100 sfm
S33High temp. alloys Ni or Co basedAnnealed250 HB65-100 sfm
S34High temp. alloys. Ni or Co basedHardened350 HB50-65 sfm
S35High temp. alloys. Ni or Co basedCast320 HB35-65 sfm
S36Titanium (pure)Pure190 HB65-100 sfm
S37Titanium alloysAlpha+beta alloys, hardened310 HB50-65 sfm

Site Map

Groove-Turn & Parting  ISO-Turning   Threading   Milling   Hole Making   Reaming   Boring   Tooling Systems   Modular Adaptations  Multifunction Tools 

Terms of Use and Legal Disclaimer   Privacy Statement
© 2024 ISCAR LTD. Manufacturer of Metalworking Tools (Iscar.com) All Rights Reserved