MILLING
NPA 5/2018
New Family of Multifunction Milling Cutters
Highlights
ISCAR is introducing a new family of multifunction cutters
featuring four different insert geometries.
The new TOR6MILL milling cutters and inserts have been designed for a wide range of applications in the die & mold, turbine blade, and general engineering industries.
These TOR6MILL cutters are available in the following configurations:
TR6 ER - Endmills in a diameter range of 16-32 mm
TR6 ER-M - Interchangeable milling heads with FLEXFIT adaptation in a diameter range of 20-42 mm
TR6 FR - Face mills in 52, 66 and 80 mm diameters
Tool Features
- Tool diameter does not change for all insert corner radii
- Tool design enables undercutting
- Coolant holes are directed to each and every cutting edge
- Cutter body has a special protective polished coating for uninterrupted chip flow and protection from corrosion and wear
The inserts are available in four cutting geometries that enable optimal machining of different applications.
TR6 TNCU/MU 1004 - Double sided insert with six round cutting edges, available in 0.5 to 3.0 mm corner radii
Features
Six cutting edges
Positive rake angle
Advantages
Provides excellent surface finish
TR6 TXMT 1004 - Single sided insert with three cutting edges for 90° shoulder and face milling
Features
0.8 mm corner radius
4 mm maximum depth of cut
TR45 TXMT 1004 - Single sided insert with three 45°cutting edges for general use and for face and chamfer milling
Features
3 mm maximum depth of cut
TRFF TXMT 1004 - Single sided insert with three cutting edges for fast feed machining
Features
17˚ cutting edge angle
Three cutting edges
0.8 mm maximum depth of cut
Ramping down capability
1.4 mm radius for programming
TR6 TNCU/MU 0702 - Double sided ground inserts with six cutting edges, available with 0.5, 1.0 and 1.5 mm corner radii.
Features
Six cutting edges
Positive rake angle
TR90 TXMT 0702 - Single sided insert with three cutting edges for 90° shoulder milling
Features
0.4 mm corner radius
2.5 mm maximum depth of cut
TRFF TXMT 0702 - Single sided insert with three cutting edges for high feed machining
Features
18˚ cutting edge angle
Three cutting edges
0.6 mm maximum depth of cut
Ramping down capability
1.0 mm radius for programming
The TOR6MILL inserts are produced from ISCAR’s latest SUMOTEC carbide grades that ensure high productivity.
TR6 TNCU/MU
Double Sided Inserts with Six Round Cutting Edges, Available in 0.5 Up to 3.0 mm Corner Radii
TR90 TXMT
Single Sided Insert with Three Cutting Edges for 90° Shoulder and Face Milling
TRFF TXMT
Single Sided Insert with Three Cutting Edges for High Feed Machining
(1) Radius for programming
(2) Edge angle related to the wiper
TR45 TXMT
Single Sided Inserts with Three Cutting Edges for 45° Chamfering and Face Milling
TR6 ER
Multifunction Endmills that can Carry Four Different Insert Geometries
• Note: The data refers to TR6 TNCU 070210 and TR6 TNCU 100425 master inserts, for other insert radii and geometries refer to the table below
(1) For undercutting
(2) Number of inserts
(3) Item weight
Tool
Insert
For undercutting
(1) Maximum ramp down angle
TR6 ER-M
Multifunction Endmills with FLEXFIT Threaded Adaptation
that can Carry Four Different Insert Geometries.
• Note: The data refers to TR6 TNCU 070210 and TR6 TNCU 100425 master inserts, for other insert radii and geometries refer to the table below
(1) For undercutting
(2) Number of inserts
(3) Item weight
Tool
Insert
For undercutting
TR6 FR
Multifunction Face Mills that can Carry Four Different Insert Geometries
• Note: The data refers to TR6 TNCU 100425 master insert, for other insert radii and geometries refer to the table below
(1) For undercutting
(2) Number of inserts
(3) Item weight
* Optional, should be ordered separately
Tool
Insert
For undercutting
The NPA05-2018's pdf file:
View (PDF) or
Download (ZIP)
