Principles of Turning with GROOVE-TURN Tools
![](/MediaR/images/FaceGrooving_Princlples-of-turning.jpg)
The deflection is influenced by the following factors:
Feed f
Depth of Cut ap
Overhang of Insert Support T
Width of Insert Support A
Cutting Speed Vc
Workpiece Material
Depth of Cut ap
Overhang of Insert Support T
Width of Insert Support A
Cutting Speed Vc
Workpiece Material
When all of the above factors remain constant during turning, a high degree of accuracy with a tolerance up to ±0.01 mm can be achieved.
If the conditions are too light (such as in a super-finish operation), there may not be enough deflection and the clearance angle will be very small. This may result in chatter and vibration.