TECHKNOW

Resize
Dock/Undock
NEW FAQ ADDED
X
Notre site utilise des cookies et autres technologies pour vous proposer des contenus ciblés selon vos centres d'intérêts.

Vous pouvez à tout moment modifier les paramètres de ces cookies.

Pour en savoir plus et paramétrer vos cookies.

Medium Diameter Face Machining Systems

Tool: HFHR/L…
Insert: HFPR/L...

W = 3-6 mm
Tmax = 32 mm
Min. dia. = 25 mm

Integral shank toolholder which uses double-ended 3 mm inserts. Used for face grooving and face turning of small parts, for 12 mm minimum groove diameter.
Tool: HFPAD…
Insert: HFPR/L…

W = 3-6 mm
Tmax = 22 mm
Min. dia. = 25 mm

Slanted, screw-clamped adapter, used with HELIFACE and GRIP inserts. A part of the MODULAR-GRIP system. Very rigid, for tough face operations.
Tool: SGFFR/L
Insert: GFF…

W = 2-6 mm
Tmax = 30 mm
Min. dia. = 25 mm

Integral toolholders which use SELF-GRIP inserts. Recommended for face grooving only. Excellent chip evacuation.
Tool: HFFR/L…
Insert: HFPR/L…

W =4-6 mm
Tmax = 38 mm
Min. dia. = 48 mm

Economical, double-ended blades which use HELIFACE and GRIP inserts. Recommended for deep face grooving and face turning to a maximum depth of 38 mm.
Tool: SGFFA R/L
Insert: GFF…

W = 2-6 mm
Tmax = 40 mm
Min. dia. = 25 mm

Reinforced blades which use SELF-GRIP inserts. Recommended for face grooving only, can machine along shaft. Excellent chip evacuation.
Tool: HFHR/L..-M
Insert: HFPR/L…

W = 3-6 mm
Tmax = 5 mm
Min. dia. = 20 mm

Integral toolholders, used with HELIFACE and GRIP inserts. For machining up to 5 mm depth. 3–6 mm wide inserts can be mounted in the same pocket.
Tool: HFAIR/L..& HGAIR/L
Insert: HFPR/L…

W = 3-6 mm
Tmax = 12 mm
Min. dia. = 32 mm

Exchangeable, internal coolant, internal adapters. Used with HELIFACE and GRIP inserts. Recommended for deep internal face machining.
Tool: HFIR/L..-MC
Insert: HFPR/L…

W = 3-6 mm
Tmax = 5 mm
Min. dia. = 20 mm

Boring bars for shallow face machining of up to 5 mm depth. Used with HELIFACE and GRIP inserts. Internal coolant. 3–6 mm width inserts can be mounted on the same pocket.
© ISCAR LTD. Manufacturer of Metalworking Tools (Iscar.com) All Rights Reserved