Page 35 - Multi-Master Catalog

l Engineered for
MAXIMUM
MT-UN-MM Performance
Carbide Milling Heads with a Threaded Connection, for Internal UN Thread Profile
MULTI-MASTER

P
Ts

D

ap
l1
Application: General engineering
Dimensions

IC908
Designation TPI UNC UNF UNEF D Flute ap l1 Ts
MT 10D6 24UN-MMT05 24.0 - - 9/16-5/8 10.00 4 5.30 12.75 T05 l
MT 10D6 20UN-MMT05 20.0 - 1/2 - 10.00 4 5.10 12.75 T05 l
MT 10D5 18UN-MMT05 18.0 - 9/16-5/8 1 1/8-1 5/8 10.00 4 5.60 12.75 T05 l
MT 12D8 16UN-MMT06 16.0 - 3/4 - 12.00 4 8.00 17.05 T06 l
MT 16E12 14UN-MMT08 14.0 - 7/8 - 16.00 5 12.70 20.85 T08 l
MT 16E12 12UN-MMT08 12.0 - 1-1 1/2 - 16.00 5 12.70 20.85 T08 l
MT 15D12 10UN-MMT08 10.0 3/4 - - 15.30 4 12.70 20.85 T08 l
MT 16C11 9UN-MMT08 9.0 7/8 - - 16.00 3 11.30 20.85 T08 l
MT 16C12 8UN-MMT08 8.0 1.0 - - 16.00 3 12.70 20.85 T08 l
• For shanks, see pages 63-71 • For Clamping keys (should be ordered separately), tightening torques and clamping instructions, see page 8. • Do not apply
lubricant to the threaded connection

NUT
P
P/8

60˚
P/4
SCREW

33