Page 47 - Multi-Master Catalog

MM EB Performance
Engineered for
Interchangeable Solid Carbide Ball Nose Milling Heads
MAXIMUM
MULTI-MASTER
r
D=5.0 - 7.4° Ts
D=6.0 - 11.7° Ha°
De8 D2

ap
l

Dimensions

IC908
Designation D Flute ap r Ts D2 l Ha°
MM EB050E07-4T05 5.00 4 7.00 2.49 T05 8.00 15.00 38.0 l
MM EB060E05-4T05 6.00 4 5.00 2.99 T05 8.00 10.00 38.0 l
MM EB080A05-2T05 8.00 2 5.00 3.98 T05 7.70 10.00 30.0 l
MM EB080A05-4T05 8.00 4 5.00 3.98 T05 7.70 10.00 30.0 l
MM EB100A07-2T06 10.00 2 7.00 4.98 T06 9.60 13.00 30.0 l
MM EB100A07-4T06 10.00 4 7.00 4.98 T06 9.60 13.00 30.0 l
MM EB120A09-2T08 12.00 2 9.00 5.98 T08 11.70 16.50 30.0 l
MM EB120H09CF-3T08I (1) 12.00 3 9.00 5.98 T08 11.70 16.50 38.0 l
MM EB120A09-4T08 12.00 4 9.00 5.98 T08 11.70 16.50 30.0 l
MM EB.500A37-2T08 12.70 2 9.50 6.33 T08 12.40 16.50 30.0 l
MM EB.500A37-4T08 12.70 4 9.50 6.33 T08 12.40 16.50 30.0 l
MM EB160A09-2T10 16.00 2 9.00 7.98 T10 15.30 20.50 30.0 l
MM EB160A12-4T10 16.00 4 12.00 7.98 T10 15.30 20.50 30.0 l
MM EB200A15-4T12 20.00 4 15.00 9.97 T12 18.30 25.50 30.0 l
MM EB250A22-4T15 25.00 4 22.00 12.47 T15 23.90 37.00 30.0 l
• For shanks, see pages 63-71 • For Clamping keys (should be ordered separately), tightening torques and clamping instructions, see page 8. • Do not apply
lubricant to the threaded connection. • For user guide, see pages 72-84.
(1) With coolant holes directed to each flute

MM EBA
2 Flute High Precision, Interchangeable Solid Carbide
Ball Nose Heads, for Machining Aluminum

r Ts

De8 D2

ap
l
Ha° ALUMINUM

Dimensions

IC08
Designation D Flute ap r r ±toler Ts D2 l Ha°
MM EBA080B05-2T05 8.00 2 5.00 3.98 0.010 T05 7.70 10.00 45.0 l
MM EBA100B07-2T06 10.00 2 7.00 4.98 0.010 T06 9.60 13.00 45.0 l
MM EBA120B09-2T08 12.00 2 9.00 5.98 0.012 T08 11.50 16.50 45.0 l
MM EBA.500B37-2T08 12.70 2 9.50 6.35 0.012 T08 12.40 16.50 45.0 l
MM EBA160B12-2T10 16.00 2 12.00 7.98 0.012 T10 15.30 20.50 45.0 l
MM EBA200B15-2T12 20.00 2 15.00 9.97 0.012 T12 18.30 25.50 45.0 l
MM EBA250B22-2T15 25.00 2 22.00 12.50 0.012 T15 23.90 37.00 45.0 l
• For shanks, see pages 63-71 • For Clamping keys (should be ordered separately), tightening torques and clamping instructions, see page 8. • Do not apply
lubricant to the threaded connection. • For user guide, see pages 72-84.

45