Page 174 - ISCAR FACE GROOVING LINES

FACE GROOVE-TURN USER GUIDE
Feed
Face Grooving and Turning Recommendations

Using Adapters for 3 mm Inserts Using Adapters for 4-6 mm Inserts

Recommended feed range for grooving with Grip 3... Recommended feed range in grooving with HFPR/L
and HGPL 3... inserts and HGAIR/L and HGAER/L inserts and HFAIR/L & HFAER/L adapters.
adapters. Feed range changes according to adapter type.
mm/rev
mm/rev 0.08 0.08 Feed 0.12 0.12
0.08 0.07 0.11 0.10
0.07 0.10
0.06 0.05 0.09 0.07
0.05 0.04 0.08 0.05 0.05
0.04 0.02 0.02 0.02 0.02 0.02 0.07
0.03 0.06 0.04
0.02
0.05
0.04

45 6 mm

40-60 40-60 40-80 40-80 40-80 m/min Width of Inserts (W)
Cutting Speed Vc
Depth of Cut apRecommended depth of cut and feed range in turning
HGAIR/L 12-3T6 with HFPR/L inserts and HFAIR/L & HFAER/L adapters.
HGAER/L 12-3T6 Feed range changes according to adapter type.
HGAIR/L 14-3T7
HGAER/L 14-3T7 mm
HGAIR/L 17-3T8 2.5
HGAER/L 17-3T8
HGAIR/L 21-3T9 2.0
HGAER/L 21-3T9
HGAIR/L 25-3T9 1.5

Recommended depth of cut and feed range for turning 1.0
with HGPL 3... inserts with HGAIR/L and HGAER/L
adapters. Feed range changes according to adapter type. 0.5

mm Depth of Cut ap 0.05 0.1 0.15 0.2 0.25 mm/rev
1.2 Feed

1.0 HFAIR/L- ...4
HFAER/L- ...4
0.8 HFAIR/L- ...5
HFAER/L- ...5
0.6 HFAIR/L- ...6
HFAER/L- ...6
0.4 Note: In roughing, reduce feed when depth of cut is increased, ad increase
feed at small depth of cut.
0.2

0.04 0.05 0.06 0.07 0.08 0.09 0.1 0.11 0.12 mm/rev
Feed

HGAIR/L 21-3T9
HGAER/L 21-3T9
HGAIR/L 25-3T9
HGAIR/L 14-3T7
HGAER/L 14-3T7
HGAIR/L 17-3T8
HGAER/L 17-3T8
HGAIR/L 12-3T6
HGAER/L 12-3T6
Note: In roughing, increase feed at small depth of cut, and reduce feed at
large depth of cut.

172 ISCAR