Page 109 - HOLE MAKING CATALOG p001-148

LPR OAL LS INDEXABLE DRILLS
LU
DR-2D-N (continued)
Indexable Square Insert Drills with DC= 14-60 mm DC CNT DCONMS DF
Coolant Holes, Drilling Depth 2xD

DC= 12-13.5 mm

Designation DC DCX(1) LU LPR LS OAL DCONMS DF CNT MIID(2)

DR048-096-40-16-2D-N 48.00 52.50 96.0 132.0 68.0 200.00 40.00 60.00 G3/4-14 SOMT 16

DR049-098-40-16-2D-N 49.00 53.00 98.0 134.0 68.0 202.00 40.00 60.00 G3/4-14 SOMT 16

DR050-100-40-16-2D-N 50.00 54.00 100.0 136.0 68.0 204.00 40.00 60.00 G3/4-14 SOMT 16

DR051-102-40-16-2D-N 51.00 54.50 102.0 138.0 68.0 206.00 40.00 60.00 G3/4-14 SOMT 16

DR052-104-40-16-2D-N 52.00 55.00 104.0 140.0 68.0 208.00 40.00 60.00 G3/4-14 SOMT 16

DR053-106-40-16-2D-N 53.00 55.50 106.0 142.0 68.0 210.00 40.00 60.00 G3/4-14 SOMT 16

DR054-108-40-16-2D-N 54.00 56.00 108.0 144.0 68.0 212.00 40.00 60.00 G3/4-14 SOMT 16

DR055-110-40-16-2D-N 55.00 56.50 110.0 146.0 68.0 214.00 40.00 60.00 G3/4-14 SOMT 16

DR056-112-40-16-2D-N 56.00 57.00 112.0 148.0 68.0 216.00 40.00 60.00 G3/4-14 SOMT 16

DR057-114-40-16-2D-N 57.00 57.50 114.0 150.0 68.0 218.00 40.00 60.00 G3/4-14 SOMT 16

DR058-116-40-16-2D-N 58.00 58.00 116.0 152.0 68.0 220.00 40.00 60.00 G3/4-14 SOMT 16

DR059-118-40-16-2D-N 59.00 59.00 118.0 154.0 68.0 222.00 40.00 60.00 G3/4-14 SOMT 16

DR060-120-40-16-2D-N 60.00 60.00 120.0 156.0 68.0 224.00 40.00 60.00 G3/4-14 SOMT 16

• Hole tolerance D+0.15/-0.05 in average conditions. However it can be higher or lower according to machine and tooling conditions • For eccenter sleeves (used with tool

diameter range of 14.00-60.00 only), see page 118 • For user guide and cutting conditions, see pages 117-128

(1) The hole diameter can be enlarged by shifting the drill center along the lathe X-axis, or by using eccentric sleeves in drill rotating applications

(2) Master insert identification

For inserts, see pages: AOMT/AOGT (114) • SOGX/T-AL (115) • SOMT-DT (116) • SOMT-GF (115) • SOMT-HD (116) • SOMX-DT (114) • SOMX-GF (114) • SOMX-HD

(115)

107