Page 62 - MILLING CATALOG p001-094

ENDMILLS • SOLID CARBIDE • MULTI-MASTER USER GUIDE
ISO
Machining Data for MULTI-MASTER Groove Milling Heads

Material Condition Tensile Hardness Material MM-TS mm/t MM-GRIT K-TYPE MM-GRIT P-TYPE
Strength HB No. Speed Feed Fz (max) Speed Feed mm/t Speed Feed mm/t
[N/mm2] V m/min Fz (min) V m/min Fz (min) Fz (max) V m/min Fz (min) Fz (max)

< 0.25 %C Annealed 420 125 1 110-140 0.08 0.20 110-160 0.05 0.15 - --

>= 0.25 %C Annealed 650 190 2 100-120 0.08 0.18 100-150 0.05 0.15 - --

Non-alloy Quenched

steel and < 0.55 %C and 850 250 3 70-100 0.08 0.15 80-100 0.05 0.15 - --

cast steel, tempered

free cutting >= 0.55 %C Annealed 750 220 4 70-100 0.08 0.15 80-100 0.05 0.15 - --
steel Quenched

and 1000 300 5 60-80 0.08 0.15 60-80 0.05 0.15 - --

tempered

P Low alloy and cast Annealed 600 200 6 100-120 0.08 0.15 110-150 0.05 0.15 - --
steel (less than 5% of 930 275 7 90-120 0.08 0.15 100-120 0.05 0.15 - --
alloying elements) Quenched 1000 300 8 80-110 0.08 0.15 70-110 0.05 0.15 - --
and 1200 350 9 70-100 0.05 0.12 70-100 0.05 0.15 - --

tempered

Annealed 680 200 10 60-80 0.05 0.18 60-80 0.05 0.15 - --

High alloyed steel, cast Quenched
steel and tool steel
and 1100 325 11 55-70 0.08 0.15 55-70 0.05 0.15 - --

tempered

Stainless steel Ferritic/ 680 200 12 100-130 0.06 0.12 100-130 0.03 0.15 100-130 0.03 0.10
and cast steel martensitic.

Martensitic 820 240 13 100-120 0.08 0.15 100-130 0.03 0.15 100-130 0.03 0.10

M Stainless steel Austenitic 600 180 14 80-120 0.05 0.10 90-120 0.03 0.12 90-120 0.03 0.10
and cast steel

Ferritic/ 180 15 160-220 0.10 0.20 160-220 0.03 0.12 - --
pearlitic
Grey cast iron (GG) 260 16 120-200 0.10 0.15 120-200 0.03 0.12 - --
K Cast iron nodular Pearlitic / --
martensitic 160 17 100-140 0.10 0.20 - -- -

Ferritic

(GGG) Pearlitic 250 18 80-100 0.10 0.15 - -- - --

Malleable cast iron Ferritic 130 19 180-250 0.10 0.20 180-250 0.03 0.15 - --
Pearlitic 230 20 160-220 0.10 0.15 160-220 0.03 0.15 - --

Aluminum- Not cureable 60 21 800-1200 0.10 0.20 - - - 800-1200 0.05 0.15

wrought alloys Cured 100 22 800-1200 0.10 0.20 - - - 800-1200 0.05 0.15

<=12% Si Not cureable 75 23 - - - - - - 600-1000 0.05 0.15

Aluminum- Cured 90 24 - - - - - - 500-1000 0.05 0.15

cast-alloys >12% Si High 130 25 - - - - - - 200-400 0.05 0.15
temperature

N Free cutting 110 26 - - - - - - - - -

Copper >1% Pb Brass 90 27 - - - - - - - - -
alloys 100 28 - - - - - - - - -
Electrolitic
copper

Non-metallic Duroplastics, 29 - - - - - - - - -
fiber plastics

Hard rubber 30 - - - - - - - - -

Fe based Annealed 200 31 - - - 30-40 0.02 0.12 - --

High temp. Cured 280 32 25-35 0.05 0.12 25-40 0.02 0.12 - --
Annealed
alloys Ni or Co 250 33 25-35 0.05 0.12 25-40 - - - 0.01 0.12
Cured
S based Cast 350 34 25-35 0.05 0.12 25-40 - - - 0.01 0.12

320 35 40-60 0.05 0.12 25-40 - - - 0.01 0.12

RM 400 36 40-60 0.05 0.12 40-60 - - - 0.05 0.12

Titanium Ti alloys Alpha+beta RM 1050 37 40-60 0.05 0.10 40-60 - - - 0.05 0.10
alloys cured

Hardened steel Hardened 55 HRC 38
H Chilled cast iron Hardened 60 HRC 39
40
Cast 400

Cast iron Hardened 55 HRC 41

60 ISCAR