Page 123 - MILLING CATALOG p549-788

58-60 HRc CENTER ALIGNMENT DEVICES

ADJ ST DCONMS DCONWS BD
FINEFIT Center Alignment LS LF
Shank and Base with Cylindrical
Shanks with a Clamping Flat

Designation DCONMS LF LS BD DCONWS
20.00 80.00 70.00 35.00 SR M8X1X16 DIN916 SR M6X30 DIN912
ADJ ST25 D70 25.00 20.00 80.00 70.00 35.00 SR M8X1X16 DIN916 SR M6X30 DIN912 OR 21X4N HW 4.0* ADJUST SPACER 9.5X5* HW 5.0*
ADJ ST32 D70 32.00 OR 21X4N HW 4.0* ADJUST SPACER 9.5X5* HW 5.0*

* Optional, should be ordered separately

LPR 58-60 HRc
LBX
ADJ HSK A LB (1)
FINEFIT Center Alignment Shank
and Base with a DIN69893 DCONMS DCONWS BD
HSK Tapered Shank for BD_2
Specially Tailored Toolholders

Designation DCONMS LPR LBX LB DCONWS BD BD_2 CDI(2) kg

ADJ HSK A63 D70 63.00 60.00 34.0 18.00 35.00 70.00 46.00 1 1.24

ADJ HSK A100 D70 100.00 55.00 26.0 - 35.00 70.00 - 1 2.63

Designation HW 4.0* COOLING TUBE HSK A63* WRENCH COOL TUBE HSK63* HW 5.0*
ADJ HSK A63 D70 SR M8X1X16 DIN916 SR M6X30 DIN912 OR 21X4N ADJUST SPACER 9.5X5* HW 4.0* COOLING TUBE HSK A100* WRENCH COOL TUBE HSK100* HW 5.0*
ADJ HSK A100 D70 SR M8X1X16 DIN916 SR M6X30 DIN912 OR 21X4N ADJUST SPACER 9.5X5*

(1) Use 4 mm hex key for screw adjustment.
(2) 1 - Hole for data chip, 0 - Without hole for data chip
• A cooling tube must be used with all coolant through HSK spindles (should be ordered separately)
* Optional, should be ordered separately

LPR AT3 Taper 58-60 HRc
LBX
ADJ DIN69871 LB (1)
FINEFIT Center Alignment Shank
and Base with a SS DCONWS BD 0.05 1°
DIN69871 Form AD Taper Shank CRKS
for Specially Tailored Toolholders

BD_2

Designation SS DCONWS LPR LBX LB BD BD_2 CRKS kg
35.00 50.00
ADJ DIN69871 40 D70 40 35.00 50.00 30.9 15.00 70.00 46.00 M16 1.28
ADJ DIN69871 50 D70 50
30.9 - 70.00 - M24 3.32

• (1) Use 4 mm hex key for screw adjustment.

Spare Parts

Designation

ADJ DIN69871 SR M8X1X16 DIN916 SR M6X30 DIN912 OR 21X4N HW 4.0* ADJUST SPACER 9.5X5* HW 5.0*

* Optional, should be ordered separately

671