Page 43 - MILLING CATALOG p549-788

ADJRGA LSCWS A 0.003 A 58-60 HRc DIN 69893 HSK A / E

HSK A-HYDRO DCONMS DCONWS BTED BD BD_2 G2.5
Hydraulic Chucks with
HSK DIN69893 Form HSK A50, 63= 25,000RPM
A Tapered Shanks HSK A80, 100= 18,000RPM

U<1.0 gmm

THID LB
LBX
LPR
.

Designation DCONMS DCONWS BTED BD BD_2 LPR LBX LB ADJRGA LSCWS THID CDI(1) kg

HSK A50 HYDRO 6X80 50.00 6.00 23.00 26.00 42.00 80.00 54.0 35.00 10.00 37.0 M5 1 0.75
HSK A50 HYDRO 8X80
50.00 8.00 25.00 28.00 42.00 80.00 54.0 36.00 10.00 37.0 M6 1 0.77

HSK A50 HYDRO 10X85 50.00 10.00 27.00 30.00 42.00 85.00 59.0 41.00 10.00 42.0 M8X1 1 0.80

HSK A50 HYDRO 12X90 50.00 12.00 29.00 32.00 42.00 90.00 64.0 47.00 10.00 47.0 M10X1 1 0.80

HSK A50 HYDRO 14X90 50.00 14.00 30.00 34.00 42.00 90.00 64.0 49.00 10.00 47.0 M10X1 1 0.80

HSK A50 HYDRO 16X95 50.00 16.00 34.00 38.00 42.00 95.00 69.0 52.00 10.00 52.0 M12X1 1 0.96

HSK A50 HYDRO 18X95 50.00 16.00 36.00 40.00 42.00 95.00 69.0 52.00 10.00 52.0 M12X1 1 0.98

HSK A50 HYDRO 20X100 50.00 20.00 38.00 42.00 42.00 100.00 74.0 74.00 10.00 52.0 M10X1 1 1.08
HSK A63 HYDRO 6X80 63.00 6.00 23.00 26.00 50.00 80.00 54.0 33.00 10.00 37.0 M5 1 1.09
HSK A63 HYDRO 8X80 63.00 8.00 25.00 28.00 50.00 80.00 54.0 33.00 10.00 37.0 M6 1 1.10
HSK A63 HYDRO 10X85 63.00 10.00 27.00 30.00 50.00 85.00 59.0 39.00 10.00 42.0 M8X1 1 1.13
HSK A63 HYDRO 12X90 63.00 12.00 29.00 32.00 50.00 90.00 64.0 44.00 10.00 47.0 M10X1 1 1.18

HSK A63 HYDRO 14X90 63.00 14.00 30.00 34.00 50.00 90.00 64.0 46.00 10.00 47.0 M10X1 1 1.13

HSK A63 HYDRO 16X95 63.00 16.00 34.00 38.00 50.00 95.00 69.0 52.00 10.00 52.0 M12X1 1 1.28

HSK A63 HYDRO 18X95 63.00 18.00 36.00 40.00 50.00 95.00 69.0 52.00 10.00 52.0 M12X1 1 1.32

HSK A63 HYDRO 20X100 63.00 20.00 38.00 42.00 50.00 100.00 74.0 58.00 10.00 52.0 M16X1 1 1.32
HSK A63 HYDRO 25X120 63.00 25.00 46.00 50.00 50.00 120.00 94.0 94.00 10.00 58.0 M16X1 1 1.83
HSK A63 HYDRO 32X125 63.00 32.00 56.00 60.00 53.00 125.00 99.0 83.00 10.00 62.0 M16X1 1 2.32
HSK A80 HYDRO 6X85 80.00 6.00 23.00 26.00 50.00 85.00 59.0 37.00 10.00 37.0 M5 1 1.25
HSK A80 HYDRO 14X95 80.00 14.00 30.00 34.00 50.00 95.00 69.0 47.00 10.00 47.0 M10X1 1 2.40

HSK A80 HYDRO 16X100 80.00 16.00 34.00 38.00 56.00 100.00 74.0 52.00 10.00 52.0 M12X1 1 1.91
HSK A80 HYDRO 18X100 80.00 18.00 36.00 40.00 50.00 100.00 74.0 52.00 10.00 52.0 M12X1 1 1.92
HSK A80 HYDRO 20X105 80.00 20.00 38.00 42.00 50.00 105.00 79.0 52.00 10.00 52.0 M16X1 1 2.09
HSK A80 HYDRO 25X115 80.00 25.00 46.00 50.00 50.00 115.00 89.0 58.00 10.00 58.0 M16X1 1 2.35
HSK A80 HYDRO 32X120 80.00 32.00 56.00 60.00 50.00 120.00 94.0 62.00 10.00 62.0 M16X1 1 2.65

HSK A100 HYDRO 6X85 100.00 6.00 23.00 26.00 50.00 85.00 56.0 29.00 10.00 37.0 M5 1 2.57
HSK A100 HYDRO 8X85 100.00 8.00 25.00 28.00 50.00 85.00 56.0 29.00 10.00 37.0 M6 1 2.54
HSK A100 HYDRO 10X90 100.00 10.00 27.00 30.00 50.00 90.00 61.0 35.00 10.00 42.0 M8X1 1 2.55
HSK A100 HYDRO 12X95 100.00 12.00 29.00 32.00 50.00 95.00 66.0 40.00 10.00 47.0 M10X1 1 2.60
HSK A100 HYDRO 14X95 100.00 14.00 30.00 34.00 63.00 95.00 66.0 42.00 10.00 47.0 M10X1 1 2.81

HSK A100 HYDRO 16X100 100.00 16.00 34.00 38.00 50.00 100.00 71.0 47.00 10.00 52.0 M12X1 1 2.73
HSK A100 HYDRO 18X100 100.00 18.00 36.00 40.00 50.00 100.00 71.0 48.00 10.00 52.0 M12X1 1 2.76
HSK A100 HYDRO 20X105 100.00 20.00 38.00 42.00 63.00 105.00 76.0 54.00 10.00 52.0 M16X1 1 2.83

HSK A100 HYDRO 25X115 100.00 25.00 46.00 50.00 63.00 115.00 86.0 51.00 10.00 58.0 M16X1 1 3.47
HSK A100 HYDRO 32X120 100.00 32.00 56.00 60.00 63.00 120.00 91.0 59.00 10.00 62.0 M16X1 1 3.73

• Chucking forces will be reduced by 25% if reduction sleeves are used. • A cooling tube must be used with coolant through HSK spindles (ordered separately). •

Reduction sleeves are available for 12, 20, 25 and 32 mm bore diameters (must be ordered separately). • Clamping wrench (wrench HYDRO HEX 4) and test bar should be

ordered separately.

(1) 1 - Hole for data chip, 0 - Without hole for data chip

699 562

591