Page 122 - TURNING CATALOG p001-120

ISOTURN TOOLS HF DCONMS
GAMP
A-SXFOR-DR GAMF H
Boring and Drilling Bars
with Coolant Holes WF LU
Carrying XOMT Inserts LPR
OAL=LF
Right-hand shown

Designation DCONMS LF LPR LU WF HF GAMP GAMF H DCN(1) Insert
180.00 31.0 21.0 6.00 12.50 XOMT 0602
A1612M SXFOR-06DR 16.00 8.5 0.0 0.0 15.0

(1) Cutting diameter minimum

For inserts, see pages: XOMT-DT (200)

Drilling Solid Material
Range:

Dmin=12.5 mm

D Dmax=14 mm
To achieve required diameter øD, position tool as shown at D + x (x= 0.10) to compensate for tool deflection.

x D+x Use pecking cycle, pulling back 0.1 mm after each 1 mm of DOC.
Maximum feed for steel: 0.05 mm/rev;

For stainless steel: 0.03 mm/rev

Spare Parts

Designation SR 34-508 T-7/51 PL 16
A-SXFOR-DR

SBB 10 DCONMS
Holders for Small BD DCONWS
Diameter Boring Bars

OAL H

Designation DCONMS DCONWS BD H OAL

SBB D16-4 16.00 4.00 15.00 15.0 100.00 SR M4X4 HW 2.0 PL 16*
SBB D16-5 HW 2.0 PL 16*
SBB D16-6 16.00 5.00 15.00 15.0 100.00 SR M4X4 HW 2.0 PL 16*
SBB D16-7 HW 2.0 PL 16*
SBB D20-4 16.00 6.00 15.00 15.0 100.00 SR M4X4 HW 2.0 PL 16*
SBB D20-5 HW 2.0 PL 16*
SBB D20-6 16.00 7.00 15.00 15.0 100.00 SR M4X4 HW 2.0 PL 16*
SBB D20-7 HW 2.0 PL 16*
SBB D22-4 20.00 4.00 13.00 19.0 100.00 SR M4X4 HW 2.0 PL 16*
SBB D22-5 HW 2.0 PL 16*
SBB D22-6 20.00 5.00 14.00 19.0 100.00 SR M4X4 HW 2.0 PL 16*
SBB D22-7 HW 2.0 PL 16*
SBB D25-4 20.00 6.00 15.00 19.0 100.00 SR M4X4 HW 2.0
SBB D25-5 HW 2.0
SBB D25-6 20.00 7.00 16.00 19.0 100.00 SR M4X4 HW 2.0
SBB D25-7 HW 2.0
22.00 4.00 13.00 21.0 125.00 SR M4X4

22.00 5.00 14.00 21.0 125.00 SR M4X4

22.00 6.00 15.00 21.0 125.00 SR M4X4

22.00 7.00 16.00 21.0 125.00 SR M4X4

25.00 4.00 13.00 24.0 125.00

25.00 5.00 14.00 24.0 125.00

25.00 6.00 15.00 24.0 125.00

25.00 7.00 16.00 24.0 125.00

• Holders are suitable for right- and left-hand inserts, and boring bars
* Optional, should be ordered separately
For tools, see pages: A/E-SEXPR/L-03 (112) • A/E-SWUCR (119) • A/E/S-SCLCR/L (111) • E/S-SWUBR/L (118) • MG-SWUBR/L (119)
• MG-SWUCR (119) • MGCH (414) • MGSIR/L (118)

120 ISCAR