Page 33 - TURNING CATALOG p001-120
P. 33
GAMF 27° 15° ISOTURN TOOLS
MAX
C#-DDJNR/L
Tools with CAMFIX Exchangeable 93º Bar Max
Tapered Shanks Carrying
Negative 55° Rhombic Inserts WF DCONMS
LF
Right-hand shown
Designation DCONMS WF LF Insert GAMF CP(1) CDI(2)
C4 DDJNR/L-27060-15 40.00 27.00 60.00 DN..15 6.0 140 1
C5 DDJNR/L-35060-15 50.00 35.00 60.00 DN..15 6.0 140 1
63.00 45.00 65.00 DN..15 6.0 140 1
C6 DDJNR/L-45065-15
• Use RDT 443 seat for DN.. 1504.. inserts
(1) Coolant pressure (Bar)
(2) 1 - Hole for data chip, 0 - Without hole for data chip
For inserts, see pages: DNGA-J(CBN) (229) • DNMG-F3S (157) • DNMG-F3P (156) • DNMG-M3P (156) • DNMX-M3P (162) • DNMM-R3P (162)
• DNMG-F3M (157) • DNMG-M3M (157) • DNMG/DNGG-TF (160) • DNMG-GN (161) • DNMG-NR (161) • DNMG/DNGG-PP (160) • DNMG-VL (160)
• DNMG-PF (159) • DNMG/DNGG-SF (159) • DNMG-NF (158) • DNMM-NM (162) • DNMG-WG (159) • DNMA (161) • DNGA-Ceramic (218) • DNGA-2 (CBN) (229)
• DNGA-4 (CBN) (229) • DNGG-M4HF/M4HM (CBN) (230) • DNMA (CBN) (228) • DNMG-CERMET (158)
Spare Parts
Designation
C4 DDJNL-27060-15 RDT 433 RDT 443* T-15/5 LCGR-4 SR 10400270-25.5 SR 14-506 M4X0.7 EZ 62
C4 DDJNR-27060-15 RDT 433 T-15/5 LCGR-4 SR 10400270-25.5 SR 14-506 M4X0.7 EZ 62
RDT 433 RDT 443* T-15/5 LCGR-4 SR 10400270-25.5 SR 14-506 M4X0.7 EZ 83
C5 DDJNL-35060-15 RDT 443* T-15/5 LCGR-4 SR 10400270-25.5 SR 14-506 M4X0.7 EZ 83
T-15/5 LCGR-4 SR 10400270-25.5 SR 14-506 M4X0.7 EZ 104
C5 DDJNR-35060-15 RDT 433
C6 DDJNR/L-45065-15 RDT 433
* Optional, should be ordered separately
GAMF 27° 15°
MAX
HSK A63WH-DDJNR/L WF
R-Clamp Turning Tools with 78° LF 93º
HSK Taper Shank Carrying
Negative DNMG Inserts for 15° DCONMS
Mounting on Turn-Mill Machines
Right-hand shown
Designation DCONMS LF WF Insert CDI(2) GAMF
HSK A63WH DDJNR/L J15 (1) 63.00 110.00 25.00 DN.. 15 0 7.5 RDT 433 RDT 443* SR 14-506 M4X0.7 LCGR-4 SR 10400270-25.5 T-15/5 EZ 104
• Complies with ICTM standard (ISO 12164-3). • A cooling tube must be used with all coolant through HSK spindles (should be ordered separately).
• For shank dimensions, see page 735
(1) RDT 443 for DN__ 1504.. insert.
(2) 1 - Hole for data chip, 0 - Without hole for data chip
* Optional, should be ordered separately
For inserts, see pages: DNGA-J(CBN) (229) • DNMG-CERMET (158) • DNMG-F3S (157) • DNMG-F3P (156) • DNMG-M3P (156) • DNMX-M3P (162)
• DNMM-R3P (162) • DNMG-F3M (157) • DNMG-M3M (157) • DNMG/DNGG-TF (160) • DNMG-GN (161) • DNMG-NR (161) • DNMG/DNGG-PP (160)
• DNMG-VL (160) • DNMG-PF (159) • DNMG/DNGG-SF (159) • DNMG-NF (158) • DNMM-NM (162) • DNMA (161) • DNGA-Ceramic (218) • DNGA-2 (CBN) (229)
• DNGA-4 (CBN) (229) • DNGG-M4HF/M4HM (CBN) (230) • DNMA (CBN) (228)
HSK A63WH-DDNNN GAMF 60° 27°
R-Clamp Turning Tools with 62.5° MAX MAX
HSK Taper Shank Carrying LF 62.5º
Negative DNMG Inserts 93º
DCONMS
Complies with ICTM standard (ISO 12164-3)
Designation LF Insert DCONMS GAMF CDI(2)
HSK A63WH DDNNN J15 (1) 110.00 DN.. 15 63.00 10.0 0 RDT 433 RDT 443* SR 14-506 M4X0.7 LCGR-4 SR 10400270-25.5(a) T-15/5 EZ 104
• A cooling tube must be used with all coolant through HSK spindles (should be ordered separately). • For shank dimensions, see page 735
(1) RDT 443 for DN__ 1504.. insert.
(2) 1 - Hole for data chip, 0 - Without hole for data chip
* Optional, should be ordered separately
(a) Recommended tightening torque:3 N*m
For inserts, see pages: DNGA-J(CBN) (229) • DNMG-CERMET (158) • DNMG-F3S (157) • DNMG-F3P (156) • DNMG-M3P (156) • DNMX-M3P (162)
• DNMM-R3P (162) • DNMG-F3M (157) • DNMG-M3M (157) • DNMG/DNGG-TF (160) • DNMG-GN (161) • DNMG-NR (161) • DNMG/DNGG-PP (160)
• DNMG-VL (160) • DNMG-PF (159) • DNMG/DNGG-SF (159) • DNMG-NF (158) • DNMM-NM (162) • DNMG-WG (159) • DNMA (161) • DNGA-Ceramic (218)
• DNGA-2 (CBN) (229) • DNGA-4 (CBN) (229) • DNGG-M4HF/M4HM (CBN) (230) • DNMA (CBN) (228)
31
