Page 95 - TURNING CATALOG p001-120

OHX DCONMS ISOTURN TOOLS

DCONWS CNT DCONMS DCONWS

OAL

AV-D DCONWS
Anti-Vibration Bars with
Through Coolant for DCONMS 50 & 60 mm shanks
Interchangeable Turning Heads
Designation DCONWS OAL OHN(1) OHX(2) CNT BMC(3) CP(4)

AV-D16-7D-C 16.00 16.00 156.30 55.0 92.0 G1/8 S 30
AV-D16-10D-E 16.00 16.00 204.30 96.0 140.0 - H 30

AV-D20-7D-C 20.00 20.00 200.30 70.0 120.0 G1/4 S 30
AV-D20-10D-E 20.00 20.00 260.30 120.0 180.0 - H 30
AV-D25-7D-C 25.00 25.00 257.50 88.0 155.0 S 40
AV-D25-10D-C 25.00 25.00 332.50 155.0 230.0 G1/4 S 40
AV-D32-7D-C 32.00 32.00 323.00 120.0 192.0 G1/4 S 50
G3/8

AV-D32-10D-C 32.00 32.00 419.00 192.0 288.0 G3/8 S 50
AV-D40-7D-C 40.00 40.00 411.00 128.0 251.0 G1/2 S 70
AV-D40-10D-C 40.00 40.00 531.00 248.0 368.0 G1/2 S 70
AV-D50-7D-C 40.00 50.00 523.00 168.0 318.0 G1/2 S 70
AV-D50-10D-C 40.00 50.00 673.00 318.0 468.0 G1/2 S 70

AV-D60-7D-C 40.00 60.00 633.00 208.0 388.0 G3/4 S 70
AV-D60-10D-C 40.00 60.00 813.00 388.0 568.0 G3/4 S 70

• The bars can be shortened. For details, see table below

(1) Minimum overhang

(2) Maximum overhang

(3) S-steel body, H-solid carbide body

(4) Coolant pressure (Bar)

For tools, see pages: AVC-D-SIR/L (707) • AVC-DDUNR/L (97) • AVC-DVUNR/L (97) • AVC-GAIR/L (347) • AVC-GEAIR/L (346) • AVC-PCLNR/L (96) • AVC-PCLXR/L (96)

• AVC-SCLCR/L (95) • AVC-SDUCR/L (95) • AVC-SVLCR/L (96) • AVC-SVUCR/L (95)

Bar Diameter Minimum Length After Shortening

DCONMS (mm) OAL 7D (mm) OAL 10D (mm)

16 100 - (1)
20 125 - (1)
25 155 255
32 190 320
40 240 410
50 305 520
60 380 630

(1) Cannot be shortened

Spare Parts SR M3X10DIN912
SR M3X10DIN912
Designation SR M3.5XL10-D5.5
SR M3.5XL10-D5.5
AV-D16-7D-C SR M4X12DIN912
AV-D16-10D-E SR M4X12DIN912
AV-D20-7D-C SR M5X12 DIN912
AV-D20-10D-E SR M5X12 DIN912
AV-D25-7D-C SR M6X16 DIN912
AV-D25-10D-C SR M6X16 DIN912
AV-D32-7D-C SR M6X16 DIN912
AV-D32-10D-C SR M6X16 DIN912
AV-D40-7D-C SR M6X16 DIN912
AV-D40-10D-C SR M6X16 DIN912
AV-D50-7D-C
AV-D50-10D-C
AV-D60-7D-C
AV-D60-10D-C

93