Page 27 - TURNING CATALOG p635-848
P. 27
ER/L-UN (continued) PDX RE PDX IC228
External American UN PDY RE IC50M
Full Profile (UN, UNC, UNF, UNEF) PDY IC250
Laydown Threading Inserts for INSL INSL IC IC08
General Industry IC508
IC IC808
NUT IC908
60° 1/4 TP IC1007
THREADING
Dimensions External right-hand shown
Tough 1 Hard
1/8 TP
SCREW
Designation IC TPI(3) RE INSL PDY PDX CICT(4)
16ERB 11 UN (1) 9.52 11.0 0.29 16.49 1.1 1.5 1 • • •
16EL 10 UN 9.52 10.0 0.32 16.49 1.1 1.5 1 • •
9.52 10.0 0.32 16.49 1.1 1.5 1 • ••
16ER 10 UN 9.52 10.0 0.32 16.49 1.1 1.5 1 • •
16ERB 10 UN (1) •
•
16ERM 10 UN 9.52 10.0 0.32 16.49 1.1 1.5 1 •
•
16ER 9 UN 9.52 9.0 0.35 16.49 1.3 1.6 1 ••
•
16ERB 9 UN (1) 9.52 9.0 0.35 16.49 1.3 1.6 1 • •
9.52 8.0 0.40 16.49 1.2 1.6 1 • •
16EL 8 UN 9.52 8.0 0.40 16.49 1.2 1.6 1 • •
9.52 8.0 0.40 16.49 1.2 1.6 1 • •
16ER 8 UN 9.52 8.0 0.41 16.49 1.2 1.6 1 • •
16ERB 8 UN (1) 12.70 12.0 0.27 22.00 2.2 3.4 2 •• •
16ERM 8 UN (1) 12.70 12.0 0.27 22.00 3.2 5.2 3 •
22ER 12 UN 2M (2) 12.70 7.0 0.47 22.00 1.6 2.3 1 •
22ER 12 UN 3M (2) 12.70 6.0 0.56 22.00 1.6 2.3 1 •
12.70 5.0 0.67 22.00 1.7 2.5 1
22ER 7 UN 15.88 8.0 0.41 27.50 3.1 4.9 2
22ER 6 UN
22ER 5 UN
27ER 8 UN 2M (2)
27ER 4.5 UN 15.88 4.5 0.75 27.50 1.9 2.7 1 ••
27ER 4 UN 15.88 4.0 0.85 27.50 0.7 0.8 1
• For Insert Identification System, see pages 638-639 • Tolerance: Class 2A • For threading between walls use GRIP-type insert TIP-UN
• For technical information and detailed cutting data, see pages 711-727
(1) With pressed chipformer.
(2) Multi-tooth
(3) Threads per inch
(4) Number of teeth per corner
For tools, see pages: C#-SER/L (701) • SER-D (702) • SER/L (700) • SER/L-JHP (701) • SER/L-JHP-MC (702)
661