Page 30 - notch_grip_2019
P. 30
Measurements
Metric
INGD-R/L S INSL
Precision, Single-Ended Flat
Top Deep Grooving Inserts CDX
3˚
CW BW
RE Right-hand shown
Dimensions Recommended
Machining Data
Designation CW CWTOL (1) RE RETOL (2) CDX BW S INSL IC807 f groove
(mm/rev)
INGD3062R/L (1.57) 1.57 0.025 0.19 0.063 3.05 4.95 8.74 25.15 • 0.04-0.06
INGD3094R/L (2.39) 2.39 0.025 0.19 0.063 6.35 4.95 8.74 25.15 • 0.05-0.08
INGD3125R/L (3.18) 3.18 0.025 0.19 0.063 6.35 4.95 8.74 25.15 • 0.08-0.12
INGD3189R/L (4.80) 4.80 0.025 0.57 0.063 6.35 4.95 8.74 25.15 • 0.10-0.20
• DMIN according to related boring bar
(1) Cutting width tolerance (+/-)
(2) Corner radius tolerance (+/-)
INSL
INRD-R/L S
Precision, Single-Ended
Full Radius Deep Grooving 3˚ CDX
Inserts with a Flat Rake
CW BW
RE
Right-hand shown
Dimensions Recommended
Machining Data
IC807 f groove
Designation CW CWTOL (1) RE RETOL (2) CDX BW S INSL (mm/rev)
INRD3062R/L (3.18) 3.18 0.025 1.57 0.064 6.35 4.95 8.74 25.15 • 0.07-0.11
(1) Cutting width tolerance (+/-)
(2) Corner radius tolerance (+/-)
INSL
INGT-R/L S
Precision, Double-Ended Flat
Top Deep Grooving Inserts
3˚ CDX
CW BW
RE Right-hand shown
Dimensions Recommended
Machining Data
IC807 f groove
Designation CW CWTOL (1) RE RETOL (2) CDX BW S INSL (mm/rev)
INGT3094R/L (2.39) 2.39 0.025 0.19 0.063 6.99 4.95 8.74 34.80 • 0.05-0.08
INGT3125R/L (3.18) 3.18 0.025 0.19 0.063 11.10 4.95 8.74 34.80 • 0.08-0.12
• DMIN according to related boring bar
(1) Cutting width tolerance (+/-)
(2) Corner radius tolerance (+/-)
30 ISCAR