Page 202 - Threading_Handbook

THREAD MILLING Thread Profile / Application
• Is full profile or partial profile required?
• What is the threading profile (square,
triangular, trapezoidal or other)?
Standard depend Pitch / TPI
• What is the threading standard?

• What is the threading pitch / TPI?
Depending on the answers to the questions in this section, it is possible to check which of
the families meet the thread profile / standard depend pitch / TPI requirements.

Available Standards - Full and Partial Profile - Solution for Internal Threading
Thread Milling Pitch (mm)
Family Subfamily 0.250.300.350.400.450.500.60 0.70 0.75 0.80 1.00 1.25
MTECS ISO ISO ISO ISO ISO ISO ISO ISO MJ ISO ISO MJ ISO MJ ISO MJ
MTECSH ISO ISO ISO ISO ISO ISO ISO ISO ISO
MTEC ISO ISO ISO ISO ISO ISO
SOLIDTHREAD MTECB ISO ISO ISO ISO ISO ISO
MTECZ ISO ISO
MTECQ ISO
MTECI Partial profile - 60°
MT-…-MM ISO ISO ISO ISO
MULTI-MASTER
MM TRD Partial profile - 60°
T-SLOT SD TRD
MTE ISO ISO ISO ISO
MTF ISO
MILLTHREAD
MTSRH endmill ISO
MTSRH shell mill ISO
Available Standards - Full and Partial Profile - Solution for Internal Threading
Thread Milling Pitch (mm)
Family Subfamily 1.50 1.75 2.00 2.50 3.00 3.50 4.00 4.50 5.00 5.50 6.00
MTECS ISO ISO MJ ISO ISO
MTECSH ISO ISO ISO
MTEC ISO ISO ISO ISO ISO
SOLIDTHREAD MTECB ISO ISO ISO ISO ISO
MTECZ ISO ISO ISO
MTECQ ISO ISO ISO
MTECI Partial profile - 60° Partial profile - 60°
MT-…-MM ISO ISO ISO ISO ISO ISO
MULTI-MASTER
MM TRD Partial profile - 60° Partial profile - 60°
T-SLOT SD TRD Partial profile - 60°
MTE ISO ISO ISO ISO
MTF ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO
MILLTHREAD
MTSRH endmill ISO ISO ISO ISO ISO ISO ISO ISO ISO
MTSRH shell mill ISO ISO ISO ISO ISO ISO ISO ISO ISO

202 ISCAR