Page 214 - Threading_Handbook

THREAD MILLING Family Cutter Diameters - Full Profile - ISO Standard - Solution for Internal Threading 0.75
Pitch (mm)
Thread Milling
0.25
Subfamily
0.60 0.70
0.45
0.50
0.30 0.35 0.40
Ø1.65 -
Ø2.37 -
Ø2.75 Ø3.1
Ø8
MTECS Ø0.72 - Ø0.90Ø1.05 Ø1.2 Ø1.53
Ø1.95
Ø5.35
Ø1.65 -
MTECSH
Ø1.2 Ø1.55
Ø2.35 Ø2.75 Ø3.1
Ø1.95
Ø2.2 -
MTEC
Ø4.5
Ø3.1
SOLIDTHREAD
Ø3.8
MTECB
Ø10.0
MTECZ Ø3.8 Ø3.1 Ø4.5 -
MTECQ
Ø10.0 - Ø10.0 -
MULTI-MASTER MT-…-MM
Ø12.0 Ø12.0
Cutter Diameters - Full Profile - ISO Standard - Solution for Internal Threading
Thread Milling Pitch (mm)
Family Subfamily 0.80 1.00 1.25 1.50 1.75 2.00 2.50 3.00 3.50
MTECS Ø3.8 Ø4.65 Ø6 Ø7.8 Ø9 Ø11.8 Ø15
MTECSH Ø3.8 Ø4.65 Ø5.95 Ø7.8 Ø9 Ø11.8
Ø4.0 - Ø7.0 - Ø10.0 -
MTEC Ø3.6 Ø5 Ø8 Ø14 Ø16
Ø8.0 Ø16.0 Ø20.0
SOLIDTHREAD Ø4.6 - Ø7.8 - Ø10.0 -
MTECB Ø3.8 Ø6 Ø9 Ø15 Ø18
Ø10.0 Ø16.0 Ø11.8
Ø4.8 - Ø7.8 - Ø10.0 -
MTECZ Ø6 Ø9
Ø8.0 Ø16.0 Ø11.8
MTECQ Ø12 Ø10 Ø20 Ø20
Ø10.0 - Ø10.0 - Ø10.0 - Ø12.0 - Ø16.0 -
MULTI-MASTER MT-…-MM Ø12 Ø15.4 Ø20
Ø16.0 Ø12.0 Ø16.0 Ø20.0 Ø20.0
Cutter Diameters - Full Profile - ISO Standard - Solution for External Threading
Thread Milling Pitch (mm)
Family Subfamily 1.00 1.25 1.50 1.75 2.00
SOLIDTHREAD MTEC Ø10 Ø10 Ø10.0 - Ø12.0 Ø12 Ø12
Cutter Diameter - Full Profile - UN Standard - Solution for Internal Threading
Thread Milling TPI
Family Subfamily 80 72 56 48 40 36 32 28 24 20
Ø2.1 - Ø2.55 Ø4.75
MTECS Ø1.15 Ø1.45 Ø1.65 Ø1.9 Ø3.3 Ø5 Ø6.6
Ø2.45 - Ø3.7 - Ø8.0
Ø2.1 - Ø2.55 Ø4.2 - Ø3.5 - Ø4.75
MTECSH Ø1.15 Ø1.65 Ø1.9
Ø2.45 - Ø3.7 Ø5.0 Ø6.6 - Ø8.0
SOLIDTHREAD Ø4.0 - Ø5.0 - Ø4.5 -
MTEC Ø3.2
Ø6.0 Ø7.0 Ø12.0
Ø3.2 - Ø6.6 - Ø8.0 -
MTECB Ø5
Ø6.0 Ø8.0 Ø10.0
MTECZ Ø10
10.0- 10.0-
MULTI-MASTER MT-…-MM 10 10
12.0 12.0

214 ISCAR