Page 30 - notch_grip_2021

MeMaesturricements INSL
S
INGD-R/L
Precision, Single-Ended Flat CDX
Top Deep Grooving Inserts 3˚
CW
RE BW

Dimensions Right-hand shown

Designation CW CWTOL(1) RE RETOL(2) CDX BW S RecommendedIC807
Machining Data
INGD3062R/L (1.57) 1.57 0.025 0.19 0.063 3.05 4.95 8.74
f groove
INGD3094R/L (2.39) 2.39 0.025 0.19 0.063 6.35 4.95 8.74 INSL (mm/rev)

INGD3125R/L (3.18) 3.18 0.025 0.19 0.063 6.35 4.95 8.74 25.15 • 0.04-0.06
25.15 • 0.05-0.08
INGD3189R/L (4.80) 4.80 0.025 0.57 0.063 6.35 4.95 8.74 25.15 • 0.08-0.12
25.15 • 0.10-0.20

• DMIN according to related boring bar
(1) Cutting width tolerance (+/-)
(2) Corner radius tolerance (+/-)

INRD-R/L INSL BW
Precision, Single-Ended S
Full Radius Deep Grooving
Inserts with a Flat Rake 3˚ CDX
CW
Right-hand shown
RE
Recommended
Dimensions Machining Data

IC807 f groove

Designation CW CWTOL(1) RE RETOL(2) CDX BW S INSL (mm/rev)
8.74 25.15 • 0.07-0.11
INRD3062R/L (3.18) 3.18 0.025 1.57 0.064 6.35 4.95

(1) Cutting width tolerance (+/-)
(2) Corner radius tolerance (+/-)

INGT-R/L INSL
Precision, Double-Ended Flat S
Top Deep Grooving Inserts
3˚ CDX
CW BW

RE Right-hand shown

Dimensions Recommended
Machining Data

IC807 f groove

Designation CW CWTOL(1) RE RETOL(2) CDX BW S INSL (mm/rev)
4.95 8.74 34.80 • 0.05-0.08
INGT3094R/L (2.39) 2.39 0.025 0.19 0.063 6.99 4.95 8.74 34.80 • 0.08-0.12

INGT3125R/L (3.18) 3.18 0.025 0.19 0.063 11.10

• DMIN according to related boring bar
(1) Cutting width tolerance (+/-)
(2) Corner radius tolerance (+/-)

30 ISCAR