Page 85 - HOLE_MAKING_CATALOG_INCH_2022_P1-P186

OAL
MNC-7/8D LPR
Large Diameter Indexable Drills PL LU
for the Wind Turbine Industry
DC PDD DCONMS DF

M E T R I C INDEXABLE DRILLS
Designation DC PDD LU PL LPR OAL DCONMS DF Insert (1) Insert 1 (2)
MNC 332-265 A32-175-09-8D 33.20 17.50 270.60 5.570 304.30 364.30 32.00 42.00 SOGT 09T306-W HCP 175-IQ
MNC 362-289 A32-190-10-8D 36.20 19.00 294.60 5.570 326.80 386.80 32.00 42.00 SOGT 100408-W HCP 190-IQ
MNC 392-289 A40-219-10-7D 39.20 21.90 294.90 5.940 328.00 396.00 40.00 50.00 SOGT 100408-W HCP 219-IQ
• Hole tolerance: D+0.10/-0.05 in average conditions. However, it can be higher or lower according to machine and tooling conditions • Intermediate sizes are available on
request • For user guide and cutting conditions, see page 92
(1) Outer insert
(2) Central insert
For inserts, see pages: HCP-IQ (56) • SOGT-W (83)

Spare Parts

Designation
MNC 332-265 A32-175-09-8D SR 34-506 M3X0.5 BLD T09/M7-SW4 SW4-SD K MNC MULTI SR 34-508 M2.2X0.45 T-7/51 GPS-05-18-060
MNC 362-289 A32-190-10-8D SR 14-571 BLD T10/S7 SW6-SD K MNC MULTI SR 34-508 M2.2X0.45 T-7/51 GPS-05-18-060
MNC 392-289 A40-219-10-7D SR 14-571 BLD T10/S7 SW6-SD K MNC MULTI SR 34-508 M2.2X0.45 T-7/51 GPS-05-18-060

SOGX-W RE
Precision Ground Inserts with
DT General Use Chipformer IC
and a Wiper for MNC
Large Diameter Drills
S

Dimensions Tough 1 Hard

IC808 IC8080
Designation IC S RE
SOGX 050204-W .213 .094 .0160 •
SOGX 060304-W .244 .126 .0160 •
SOGX 070305-W .303 .142 .0200 • •
• For user guide and cutting conditions, see page 92
For tools, see pages: MNC-5D (80, 81)

SOGT-W RE
Precision Ground Inserts with
DT General Use Chipformer IC
and a Wiper for MNC Drills
S

Dimensions Tough 1 Hard

IC808 IC8080
Designation IC S RE
SOGT 09T306-W .354 .150 .0240 • •
SOGT 100408-W .386 .169 .0310 • •
SOGT 120408-W .500 .187 .0310 •
• For user guide and cutting conditions, see page 92
For tools, see pages: MNC-3D (80) • MNC-5D (80, 81) • MNC-7/8D (83)

83