Page 107 - HOLE_MAKING_CATALOG_INCH_2022_P237-P372
P. 107
GD-DHL BD
Gundrills Carrying Indexable DC -0.07 DCONMSh6
0
Inserts with 2 Chip Splitting
Cutting Edges and a Wiper for PL LU
High Hole Surface Quality OAL LS GUNDRILLS
M E T R I C
Designation DC LU OAL DCONMS BD PL LS Insert
GD-DHL 12.00X800-U03 12.00 713.80 801.80 19.05 11.50 1.80 70.0 LOGT 06..
GD-DHL 12.00X800-22 12.00 733.80 801.80 20.00 11.50 1.80 50.0 LOGT 06..
GD-DHL 12.00X800-34 12.00 733.80 801.80 20.00 11.50 1.80 50.0 LOGT 06..
GD-DHL 12.00X1000-U03 12.00 913.80 1001.80 19.05 11.50 1.80 70.0 LOGT 06..
GD-DHL 12.00X1000-22 12.00 933.80 1001.80 20.00 11.50 1.80 50.0 LOGT 06..
GD-DHL 12.00X1000-34 12.00 933.80 1001.80 20.00 11.50 1.80 50.0 LOGT 06..
GD-DHL 12.00X1650-U03 12.00 1563.80 1651.80 19.05 11.50 1.80 70.0 LOGT 06..
GD-DHL 12.00X1650-22 12.00 1583.80 1651.80 20.00 11.50 1.80 50.0 LOGT 06..
GD-DHL 12.00X1650-34 12.00 1583.80 1651.80 20.00 11.50 1.80 50.0 LOGT 06..
GD-DHL 13.00X800-U04 13.00 711.80 801.80 25.40 12.50 1.80 70.0 LOGT 06..
GD-DHL 13.00X800-23 13.00 725.80 801.80 25.00 12.50 1.80 56.0 LOGT 06..
GD-DHL 13.00X800-35 13.00 725.80 801.80 25.00 12.50 1.80 56.0 LOGT 06..
GD-DHL 13.00X1000-U04 13.00 911.80 1001.80 25.40 12.50 1.80 70.0 LOGT 06..
GD-DHL 13.00X1000-23 13.00 925.80 1001.80 25.00 12.50 1.80 56.0 LOGT 06..
GD-DHL 13.00X1000-35 13.00 925.80 1001.80 25.00 12.50 1.80 56.0 LOGT 06..
GD-DHL 13.00X1650-U04 13.00 1561.80 1651.80 25.40 12.50 1.80 70.0 LOGT 06..
GD-DHL 13.00X1650-23 13.00 1575.80 1651.80 25.00 12.50 1.80 56.0 LOGT 06..
GD-DHL 13.00X1650-35 13.00 1575.80 1651.80 25.00 12.50 1.80 56.0 LOGT 06..
• Note: Gundrills can be supplied with up to 2400 mm length on request. • Inserts and guide pads to be ordered separately (not included with the tools).
• For user guide and cutting conditions, see pages 350-353
• Preventative measures: Do NOT operate the deep hole drill at full speed before engaging the guide hole. Enter the guide hole slowly at a speed of 50 - 100 rpm.
For inserts, see pages: LOGT (349)
GPS
Deep Drilling Solid RE
Carbide Guide Pads
W1
INSL S
Dimensions Tough 1 Hard
Designation W1 RE INSL S IC928 IC908
GPS-04-16-055-DC 4.0 5.50 16.00 2.0 • •
Spare Parts
Diameter Range Insert Insert Clamping Screw Key N·m Solid Carbide Guide Pad Guide Pad Clamping Screw Key N·m
12.00-13.99 LOGT 060204R-DT SR 10503833L040 T-7F 0.9 GPS-04-16-055-DC TS 20043I/HG-P M2X0.4 Wrench IP-6/5 0.65
Universal Marking for Deep Drilling Tools
D d1
d2
L
D**.** L*** d** X** XX
D L/D d1 d2 Driver Type
Example: ******* [Lot no.]
Metric: D14.00 L1000 d25X56WD
Inch: D0.551 L39.37 d0.984X2.205WD
*******
343