Page 29 - HOLE_MAKING_CATALOG_INCH_2022_P447-P626

IHSR-MIFR
Trepanning Cartridges Carrying WB
MINCUT Inserts Mounted on the CWN-CWX DAXN
BHR MB32-32X63 Boring Head DAXX ITS BORE
OAL OAH

Designation DAXN (1) DAXX (2) CWN (3) CWX (4) OAL WB OAH Insert
IHSR 8-21 MIFR8 .31 .83 .059 .087 1.260 .906 .690 MI.R 8 SR 14-297 T-8/5
IHSR 19-34 MIFR10 .75 1.34 .079 .118 1.063 .866 .700 MI.R 10 SR 34-506 M3X0.5 T-9/5
(1) Minimum axial grooving diameter
(2) Maximum axial grooving diameter
(3) Minimum cutting width
(4) Maximum cutting width
For inserts, see pages: MIFR (475)
For holders, see pages: BHR MB (472)

MIFR 15 MIFR 10 MIFR 8

MIFR CDX PDY S1
Screw-Clamped Inserts
for Internal Face Grooving DAXN-DAXX INSL WF
and Turning, Penetration CW CDX
Diameter Range .315-.669"
RE
Recommended
Dimensions
Machining Data
IC908 f face-groove f face-turn
Designation INSL CW CWTOL (1) RE RETOL (2) WF S1 DAXN (3) DAXX (4) CDX PDY (IPR) (IPR)
MIFR 8-1.50-0.20 .697 .059 .00078 .0079 .0008 .102 .256 .31 .45 .217 .433 • .0008-.0039 .0008-.0024
MIFR 8-1.60-0.80 .697 .063 .00078 .0315 .0008 .102 .256 .31 .48 .217 .433 • .0008-.0039 .0008-.0024
MIFR 8-2.00-0.20 .697 .079 .00078 .0079 .0008 .110 .256 .31 .63 .217 .433 • .0008-.0039 .0008-.0024
MIFR 8-2.20-0.20 .697 .087 .00078 .0079 .0008 .114 .256 .31 .83 .217 .433 • .0008-.0039 .0008-.0024
MIFR 10-2.00-0.20 .988 .079 .00078 .0079 .0008 .118 .299 .39 - .354 .583 • .0008-.0039 .0008-.0024
MIFR 10-2.00-1.00 .988 .079 .00078 .0394 .0008 .118 .299 .39 - .354 .583 • .0008-.0039 .0008-.0024
MIFR 10-2.50-0.20 .988 .098 .00078 .0079 .0008 .122 .299 .39 1.18 .354 .583 • .0008-.0039 .0008-.0024
MIFR 10-2.50-1.25 .988 .098 .00078 .0492 .0008 .130 .299 .39 - .354 .583 • .0008-.0039 .0008-.0024
MIFR 10-3.00-0.20 .988 .118 .00078 .0079 .0008 .134 .299 .39 1.18 .354 .583 • .0008-.0039 .0008-.0024
MIFR 10-3.00-1.50 .988 .118 .00078 .0590 .0008 .130 .299 .39 1.34 .354 .583 • .0008-.0039 .0008-.0024
MIFR 15-2.50-0.20 1.181 .098 .00078 .0079 .0008 .219 .354 .59 2.36 .591 .760 • .0012-.0020 .0012-.0016
MIFR 15-2.50-1.25 1.181 .098 .00078 .0492 .0008 .219 .354 .47 1.85 .591 .760 • .0012-.0020 .0012-.0016
MIFR 15-3.00-0.20 1.181 .118 .00078 .0079 .0008 .230 .354 .59 2.36 .591 .760 • .0012-.0020 .0012-.0016
MIFR 15-3.00-1.50 1.181 .118 .00078 .0590 .0008 .230 .354 .39 - .591 .760 • .0012-.0020 .0012-.0016
MIFR 15-3.50-0.20 1.181 .138 .00078 .0079 .0008 .236 .354 .39 - .591 .760 • .0012-.0020 .0012-.0016
• Recommended cutting speeds and feeds can be increased by 20-30% for aluminim, and reduced by 20-30% for titanium and Inconel
(1) Cutting width tolerance (+/-)
(2) Corner radius tolerance (+/-)
(3) Minimum axial grooving diameter
(4) Maximum axial grooving diameter
For tools, see pages: IHSR-MIFR (475)

475