Page 38 - HOLE_MAKING_CATALOG_INCH_2022_P447-P626

ITS BORE BHD MB DCONMS ADJRGR BATTERY IHWF E DCONWS IHFF (E) IHRF IHRF CH IHRF BW BHEH CW32 DCN-DCX Only for BHD PICCO ACE BH 580
LF (assembly)
80 inch
LPR
PSI Max
Fine Boring Heads with Digital
LOCK
+
.0001" Direct Adjustment
DCN-DCX
SR44
DCONWS
Diametric Display
MB50, MB63, MB80
BBH
+
LOCK
SR44
IHFF
IHAXF
Designation LF DCONMS DCN (1) DCX (2) LPR ADJRGR DCONWS RPMX (3) Lbs
BHD MB32-32-83 3.268 1.260 1.378 2.008 2.815 .118 - 20000 .89
BHD MB40-40-90 3.543 1.575 1.890 2.520 2.992 .157 - 20000 1.61
BHD MB50-50-60 3.150 1.968 .098 4.331 2.402 .197 .630 20000 2.43
BHD MB63-63-89 3.484 2.480 .236 4.921 2.736 .197 - 20000 4.85
BHD MB80-80-104 4.094 3.150 .236 7.874 3.327 .197 - 20000 8.60
• For user guide, see pages 549-566 • For spare parts, see page 508-509
• Note that a protruding reset button dictates the enlargement of the actual DCONMS by .079" in each size respectively. This is important when the tool is being used for
back-boring applications where you must clear any obstacles inside the machine/workpiece.
(1) Cutting diameter minimum
(2) Cutting diameter maximum
(3) Maximum RPM
For tools, see pages: IHAXF (505) • IHAXF-AVI (507) • IHAXF-E (507) • IHFF (509) • IHRF (509) • IHRF-BW (513) • IHRF-CH (514) • IHWF (510)

484 ISCAR