Page 25 - MILLING_CATALOG_INCH_2022_P361-P592

SWM DN
ETS-XN09
T-SLOT Endmills Carrying XNMU DC
0904 Square Inserts with 4 DCONMS
Right- and 4 Left-Hand
Cutting Edges
CW
LU
OAL
Designation DC CICT (1) ZEFP DN SWM CW LU OAL DCONMS Shank (2) Lbs
ETS D1.25-0.39-W0.62-XN09 1.250 4 2 .590 .688 .390 1.2500 3.250 .625 W .28
ETS D1.25-0.48-W0.75-XN09 1.250 4 2 .630 .688 .476 1.5000 3.750 .750 W .88
• For user guide, see pages 410-416
(1) Number of inserts
(2) W-Weldon SLOTTING & SLITTING CUTTERS
For inserts, see pages: XNMU 09 (556)
Spare Parts

Designation
ETS-XN09 SR 10508600 T-9/51

Wmin
ETS-XN13 DN
T-Slot Endmills Carrying XNMU DC DCONMS
1306 Square Inserts with 4
Right- and 4 Left-Hand
Cutting Edges
CW
LU
OAL
Designation DC CICT (1) ZEFP DN W min CW LU OAL DCONMS Shank (2) Lbs
ETS D1.46-0.62-W1.25-XN13 1.450 2 1 .772 .812 .615 1.695 4.500 1.250 W 1.11
• For user guide, see pages 410-416
(1) Number of inserts
(2) W-Weldon
For inserts, see pages: XNMU 13 (556)
Spare Parts

Designation
ETS-XN13 SR M4-L15-D4.5 BLD IP15/S7 SW6-T-SH

385