Page 21 - MILLING_CATALOG_INCH_2022_P593-P866

SS LSCWS √N5 A A .00012 AT3 Taper
CAT-HYDRO ADJRGA
Hydraulic Chucks with Coolant 58-60 HRc G2.5
Holes and Caterpillar Form DCONWS BTED BD BD_2 Size 30, 40= 18,000RPM
Size 50= 12,000RPM
ADB Tapered Shanks or U<1.0 gmm
CRKS THID LB
LBX
LPR

Designation SS DCONWS BTED BD BD_2 LPR LBX LB LSCWS ADJRGA THID CRKS CDI (1) Lbs TOOLING SYSTEMS
CAT40 HYDRO 1/4X2.677 40 .250 .906 1.023 1.750 2.677 1.927 1.299 1.460 .400 M5 5/8"-11UNC 0 2.52
CAT40 HYDRO 3/8X2.835 40 .375 1.063 1.181 1.750 2.834 2.083 1.456 1.650 .390 M8X1 5/8"-11UNC 0 2.69
CAT40 HYDRO 1/2X3.031 40 .500 1.142 1.259 1.750 3.031 2.279 1.653 1.850 .390 M10X1 5/8"-11UNC 0 2.71
CAT40 HYDRO 5/8X3.149 40 .625 1.339 1.496 1.750 3.149 2.397 1.692 2.050 .400 M12X1 5/8"-11UNC 0 2.91
CAT40 HYDRO 3/4X3.228 40 .750 1.496 1.653 1.750 3.228 2.476 1.850 2.050 .400 M12X1 5/8"-11UNC 0 3.06
CAT40 HYDRO 1X3.228 40 1.000 1.811 1.968 1.750 3.228 2.476 2.007 2.280 .390 M12X1 5/8"-11UNC 0 3.31
CAT40 HYDRO 1 1/4X4.331 40 1.250 2.205 2.559 1.750 4.331 2.832 2.204 2.440 .390 M16X1 5/8"-11UNC 0 4.89
CAT50 HYDRO 1/4X2.677 50 .250 .906 1.023 2.750 2.667 1.925 1.299 1.460 .400 M5 1"-8 UNC 0 7.03
CAT50 HYDRO 3/8X2.834 50 .375 1.063 1.181 2.750 2.834 2.083 1.456 1.650 .390 M8X1 1"-8 UNC 0 7.34
CAT50 HYDRO 1/2X3.228 50 .500 1.142 1.259 2.750 3.228 2.476 1.653 1.850 .390 M10X1 1"-8 UNC 0 7.49
CAT50 HYDRO 5/8X3.149 50 .625 1.339 1.496 2.750 3.149 2.397 1.574 2.050 .400 M12X1 1"-8 UNC 0 7.63
CAT50 HYDRO 3/4X3.228 50 .750 1.496 1.653 2.750 3.228 2.476 1.790 2.050 .400 M12X1 1"-8 UNC 0 7.56
CAT50 HYDRO 1X3.228 50 1.000 1.811 1.968 2.750 3.228 2.476 1.771 2.280 .630 M12X1 1"-8 UNC 0 7.86
CAT50 HYDRO 1 1/4X3.583 50 1.250 2.205 2.362 2.750 3.583 2.830 2.204 2.520 .470 M16X1 1"-8 UNC 0 8.93
• Chucking forces will be reduced by 25% if reduction sleeves are used. • Note: Reduction sleeves are available for 3/4 and 1-1/4 " bore diameters (order separately).
• The coolant passages in the B type flange are blocked withscrews which can be removed when required. • Clamping wrench (wrench HYDRO HEX 4) and test bar to be
ordered separately.
(1) 1 - Slot for data chip, 0 - Without slot for data chip

Spare Parts

Designation
CAT-HYDRO HYDRO CLAMP SCREW M8X14 WRENCH HYDRO HEX 4*
* Optional, to be ordered separately

613