Page 63 - NEW_PRODUCT_CATALOG_2022

DCONMS
DHUB
FFX4 FD-08
Face Mills Carrying "Bone
Shaped" Inserts with 4 Cutting OAL Rd°
Edges for Fast Feed Milling
18˚
DC APMX
DCX

Designation DCX (1) DC CICT (2) APMX AE OAL DCONMS DHUB Rd° MDN (3) MDX (4) Arbor Rg (5) MIID (6) kg
FFX4 FD050-4-22-08 50.00 34.40 4 2.00 7.8 50.00 22.00 48.00 3.3 84.40 99.00 A 4.00 FFX4 XNMU 080620 0.58
FFX4 FD063-5-22-08 63.00 47.40 5 2.00 7.8 45.00 22.00 48.00 2.3 110.40 125.00 A 4.00 FFX4 XNMU 080620T 0.48
FFX4 FD080-7-27-08 80.00 64.40 7 2.00 7.8 50.00 27.00 60.00 1.6 144.40 159.00 B 4.00 FFX4 XNMU 080620T 0.95
FFX4 FD100-8-32-08 100.00 84.40 8 2.00 7.8 50.00 32.00 78.00 1.2 184.40 199.00 B 4.00 FFX4 XNMU 080620T 1.24
FFX4 FD125-10-40-08 125.00 109.40 10 2.00 7.8 63.00 40.00 92.00 0.9 234.40 249.00 B 4.00 FFX4 XNMU 080620T 2.40
• To generate a straight surface without cusps, the width of cut must not exceed DC
(1) Cutting diameter maximum
(2) Number of inserts
(3) Machinable diameter minimum for interpolation
(4) Machinable diameter maximum for interpolation
(5) Radius for programming
(6) Master insert identification

Spare Parts
Designation
FFX4 FD050-4-22-08 SR M5-14 IP20 SW6-T BLD IP20/S7 SR PS 118-0273
FFX4 FD063-5-22-08 SR M5-14 IP20 SW6-T BLD IP20/S7 SR M10X25 DIN912
FFX4 FD080-7-27-08 SR M5-14 IP20 SW6-T BLD IP20/S7 SR M12X30DIN912
FFX4 FD100-8-32-08 SR M5-14 IP20 SW6-T BLD IP20/S7
FFX4 FD125-10-40-08 SR M5-14 IP20 SW6-T BLD IP20/S7

RE S1

FFX4 XNMU-08
"Bone Shaped" Inserts
with 4 Cutting Edges for INSL Rd°
Fast Feed Milling

W1

Dimensions Tough 1 Hard Recommended Machining Data

ap
fz
Designation INSL S1 RE W1 IC882 IC830 IC808 IC810 (mm) (mm/t)
FFX4 XNMU 080620HP 17.90 7.80 2.00 15.60 • • • 0.20-2.00 0.20-0.80
FFX4 XNMU 080620T 17.90 7.80 2.00 15.60 • • • 0.20-2.00 0.40-1.20
• For side plunging, the initial cutting feed is 0.1 mm/t • T-for steel, ferritic and martensitic stainless steel, cast iron and hardened steel
• HP-for austenitic stainless steel and high temperature alloys

61