Page 35 - Turning_catalog_INCH_2022_45_P1-112
P. 35
6° 27°
C#-DDJNR/L MAX 15°
93 º
Tools with CAMFIX Exchangeable PSI
Tapered Shanks Carrying
Negative 55° Rhombic Inserts DCONMS
WF
LF Right-hand shown ISOTURN TOOLS
Designation DCONMS WF LF Insert GAMF CP (1) CDI (2)
C4 DDJNR/L-27060-15 1.575 1.063 2.362 DN..4.. 6.0 2030 1
C5 DDJNR/L-35060-15 1.968 1.378 2.362 DN..4.. 6.0 2030 1
C6 DDJNR/L-45065-15 2.480 1.772 2.559 DN..4.. 6.0 2030 1
• Use RDT 443 seat for DN.. 43. inserts
(1) Coolant pressure (PSI)
(2) 1 - Hole for data chip, 0 - Without hole for data chip
For inserts, see pages: DNGA-J(CBN) (232) • DNMG-F3S (150) • DNMG-F3P (148) • DNMG-M3P (148) • DNMX-M3P (155) • DNMM-R3P (154)
• DNMG-F3M (149) • DNMG-M3M (149) • DNMG/DNGG-TF (153) • DNMG-GN (153) • DNMG-NR (153) • DNMG/DNGG-PP (152) • DNMG-VL (152)
• DNMG-PF (152) • DNMG/DNGG-SF (151) • DNMG-NF (151) • DNMM-NM (154) • DNMG-WG (151) • DNMA (154) • DNGA-Ceramic (219) • DNGA-2 (CBN) (231)
• DNGA-4 (CBN) (231) • DNGG-M4HF/M4HM (CBN) (232) • DNMA (CBN) (230) • DNMG-CERMET (150)
Spare Parts
Designation
C4 DDJNL-27060-15 RDT 433 RDT 443* T-15/5 LCGR-4 SR 10400270-25.5 SR 14-506 M4X0.7 EZ 62
C4 DDJNR-27060-15 RDT 433 T-15/5 LCGR-4 SR 10400270-25.5 SR 14-506 M4X0.7 EZ 62
C5 DDJNL-35060-15 RDT 433 T-15/5 LCGR-4 SR 10400270-25.5 SR 14-506 M4X0.7 EZ 83
C5 DDJNR-35060-15 RDT 433 RDT 443* T-15/5 LCGR-4 SR 10400270-25.5 SR 14-506 M4X0.7 EZ 83
C6 DDJNR/L-45065-15 RDT 433 RDT 443* T-15/5 LCGR-4 SR 10400270-25.5 SR 14-506 M4X0.7 EZ 104
7.5° 27° 15°
HSK A63WH-DDJNR/L MAX
93 º
R-Clamp Turning Tools with HSK
Taper Shank Carrying Negative
DNMG Inserts for Mounting DCONMS
on a 15° Turn-Mill Machines WF Complies with the ICTM
and HSK-T standards.
78°
LF • Right-hand shown
Designation DCONMS LF WF Insert GAMF CDI (2)
HSK A63WH DDJNR/L J15 (1) 2.480 4.331 .984 DN.. 15 7.5 0 RDT 433 RDT 443* SR 14-506 M4X0.7 LCGR-4 SR 10400270-25.5 T-15/5 EZ 104
• Complies with ICTM standard (ISO 12164-3). • A cooling tube must be used with all coolant through HSK spindles (should be ordered separately).
• For shank dimensions, see page 686
(1) RDT 443 for DN__ 43.. insert.
(2) 1 - Hole for data chip, 0 - Without hole for data chip
* Optional, should be ordered separately
For inserts, see pages: DNGA-J(CBN) (232) • DNMG-CERMET (150) • DNMG-F3S (150) • DNMG-F3P (148) • DNMG-M3P (148) • DNMX-M3P (155)
• DNMM-R3P (154) • DNMG-F3M (149) • DNMG-M3M (149) • DNMG/DNGG-TF (153) • DNMG-GN (153) • DNMG-NR (153) • DNMG/DNGG-PP (152)
• DNMG-VL (152) • DNMG-PF (152) • DNMG/DNGG-SF (151) • DNMG-NF (151) • DNMM-NM (154) • DNMA (154) • DNGA-Ceramic (219) • DNGA-2 (CBN) (231)
• DNGA-4 (CBN) (231) • DNGG-M4HF/M4HM (CBN) (232) • DNMA (CBN) (230)
33
