Page 131 - Turning_catalog_INCH_2022_45_P691-914

USER GUIDE

Tool Selection for Göltenbodt GWS Systems
Width Toolholder Tough 1 Hard
Max. of Cut Length L Right Hand Left Hand Adapter Insert
Diameter
System Size DGPAD TAGPAD TAG DGN Geometry / Feed
(W)

IC830 IC5400 IC808

2.008” MS-ES02012- LF low NON-ROTATING TOOL HOLDERS
.787” .079” GWS-MG-JHP DGPAD 2R/
L-D20-GWS-JHP*
MS-ES02013-
2.323” DGN 2002
GWS-MG-JHP MF
2.343” MS-ES02012- • • •
.079” GWS-MG-JHP DGPAD 2R/
2.657” MS-ES02013- L-D32-JHP*
1.260” GWS-MG-JHP
2.343” MS-ES02012- C
GWS02 .122” GWS-MG-JHP DGPAD 3R/ DGN 3102
2.657” MS-ES02013- L-D32-JHP* high
GWS-MG-JHP
MS-ES09003- DGPAD 2R/
.787” .079” 2.402” low
GWS-MG-JHP L-D20-GWS-JHP* DGN 2002 LF
.079” 2.343” MS-ES09003- DGPAD 2R/
1.260” GWS-MG-JHP L-D32-JHP*
.122” 2.343” MS-ES09003- DGPAD 3R/ DGN 3102
GWS-MG-JHP L-D32-JHP*
MS-ES09003- TAGPAD 2R/
.079” 2.465” TAG N2 MF • • •
1.654” GWS-MG-JHP L-D42-JHP*
.118” 2.457” MS-ES09003- TAGPAD 3R/ TAG N3
GWS-MG-JHP L-D42-JHP*
.079” 2.661” MS-ES09003- TAGPAD 2R/ TAG N2
2.047” GWS-MG-JHP L-D52-JHP* C
GWS09 .118” 2.654” MS-ES09003- TAGPAD 3R/ TAG N3 high
GWS-MG-JHP L-D52-JHP*
MS-ES41008- MS-ES41009- DGPAD 2R/
.787” .079” 2.323” low
GWS-MG-JHP GWS-MG-JHP L-D20-GWS-JHP* DGN 2002 LF
MS-ES41008- MS-ES41009- DGPAD 2R/
.079” 2.657”
1.260” GWS-MG-JHP GWS-MG-JHP L-D32-JHP*
.122” 2.657” MS-ES41008- MS-ES41009- DGPAD 3R/ DGN 3102
GWS-MG-JHP GWS-MG-JHP L-D32-JHP* MF
.079” 2.780” MS-ES41008- MS-ES41009- TAGPAD 2R/ TAG N2 • • •
1.654” GWS-MG-JHP GWS-MG-JHP L-D42-JHP*
.118” 2.772” MS-ES41008- MS-ES41009- TAGPAD 3R/ TAG N3
GWS-MG-JHP GWS-MG-JHP L-D42-JHP*
MS-ES41008- MS-ES41009- TAGPAD 2R/
.079” 2.976” TAG N2
2.047” GWS-MG-JHP GWS-MG-JHP L-D52-JHP* C
GWS41 .118” 2.968” MS-ES41008- MS-ES41009- TAGPAD 3R/ TAG N3 high
GWS-MG-JHP GWS-MG-JHP L-D52-JHP*
*Selection of right hand or left hand adapter see page 825

All trademarks and logos are the property of their respective companies
821