Page 53 - Aluminum_Machining_catalog_2023

VCGT-AF 35˚
Inserts with a Very Positive 7°
Rake Angle and Sharp Cutting IC D1
Edge for Semi-Finishing and
Finishing on Aluminum L RE S

Dimensions Recommended Machining Data

IC20 ap f
Designation L IC S RE D1 (mm) (mm/rev)
VCGT 220508-AF 22.10 12.70 5.56 0.80 5.50 • 1.00-4.50 0.10-0.25
VCGT 220512-AF 22.10 12.70 5.56 1.20 5.50 • 1.00-4.50 0.10-0.30
VCGT 220516-AF 22.10 12.70 5.56 1.60 5.50 • 1.50-4.50 0.10-0.35
• For user guide and cutting speed recommendations, see pages 4-5,26

L 107.5º

VCGT-DW (PCD) LE 117.5° 25º MAX 35º TOOLS AND INSERTS FOR MACHINING ALUMINUM WHEELS
Inserts with 7° Clearance 35° RE 95º MAX
and a Single PCD Top S 48° 112° 31º MAX
Corner Tip Chipformer for D1 95º MAX
Machining Aluminum IC 50° 70°MAX
MAX
7° 91° 52º MAX
93° 72.5º
Dimensions Recommended Machining Data

ap f
Designation L IC S RE LE D1 ID5 (mm) (mm/rev)
VCGT 160404-DW 16.60 9.52 4.76 0.40 6.60 4.40 • 0.10-3.00 0.05-0.30
VCGT 160408-DW 16.60 9.52 4.76 0.80 6.40 4.40 • 0.10-3.00 0.05-0.30
VCGT 160412-DW 16.60 9.52 4.76 1.20 6.30 4.40 • 0.10-3.00 0.05-0.30
VCGT 220516-DW 22.10 12.70 5.56 1.60 6.30 5.50 • 0.10-3.00 0.05-0.30
VCGT 220520-DW 22.10 12.70 5.56 2.00 6.20 5.50 • 0.10-3.00 0.05-0.30
VCGT 220530-DW 22.10 12.70 5.56 3.00 6.00 5.50 • 0.10-3.00 0.05-0.30
• For user guide and cutting speed recommendations, see pages 4-5,27-28,31

35° S 50° 70°MAX
VCGT (PCD) RE 4.99 7° 7° 91° 52º MAX 93° MAX 72.5º
35° Rhombic Single Brazed L
Tip Corner Inserts for 112° 31º MAX 95º
25º
MAX 117.5°
Aluminum Finishing (PCD) D1 48°
MAX
107.5º
IC
35º 95º
MAX
Dimensions Recommended Machining Data
ap f
Designation IC S RE L D1 ID5 (mm) (mm/rev)
VCGT 160404D 9.52 4.76 0.40 16.60 4.40 • 0.10-3.00 0.05-0.30
VCGT 160408D 9.52 4.76 0.80 16.60 4.40 • 0.10-3.00 0.05-0.30
• For user guide and cutting speed recommendations, see pages 4-5,27-28,31

Scan the QR code for additional information.
Enter the item description in the search field to access additional related data. 51