X
 |
Our website uses cookies and other technologies to ensure you get the best browsing experience. You can change your cookie settings at any time. Find out more on how we use cookies. |
INDUSTREALIZE
Contact Us
HOLE MAKING
NPA 21/2020
Smallest Exchangeable Drilling Inserts in the Market (from 4 mm Diameter) Now Available at 8 L/D Ratio with SUMOCHAM Line
Highlights
ISCAR is expanding the small diameter range of its leading SUMOCHAM hole making line, for drilling depths up to 8 drill diameter
Following considerable success and market demand, ISCAR is expanding the SUMOCHAM straight shank design drill family in 8 L/D ratio to include a 4.0 - 5.9 mm diameter range.
The new drills can carry a variety of drilling heads for machining different types of materials and all kind of applications, such as: ICP, ICK, ICM, FCP, HCP & QCP.
The SUMOCHAM DCN drills feature cylindrical shanks, which enable clamping of the drill in hydraulic toolholders (most recommended) or in spring collets.
Using an HCP or QCP head eliminates the need to make a pre-hole prior to drilling the 8xD depth.
Otherwise, it is recommended to drill a pre-hole by using a DCN 1.5xD drill or a centering drill (check the user guide below).
DCN C-8D
Indexable Head Drills with Coolant Holes and Cylindrical Shanks, Drilling Depth 8xD
• Do not mount smaller drilling heads other than the specified range of the drill body
(2) Cutting diameter maximum
(3) Seat size code
(4) Master insert identification
- When drilling stainless steel or high temperature alloys using the ICM drilling head, it is highly recommended to apply high pressure oil or 7-10% mineral or vegetable based oil emulsion.
- For optimal performance, it is recommended to adjust runout of outer points or chisel with a maximum of 0.02 mm.
Large runout will influence drill performance tool life and hole quality. - No setup time is needed after indexing the SUMOCHAM drill head.
- SUMOCHAM drills can be used either on milling centers or lathe machines.
- When using SUMOCHAM drill in stationary (lathe) applications, we recommend using the ISCAR GYRO device or eccenter sleeve to reduce misalignment. Misalignment will cause poor performance of the SUMOCHAM drill or even tool breakage.
1
Pre-hole 0.5xD deep for centering
Pre-hole 0.5xD deep for centering
2
Slow rotation and feed while entering to the pre-hole
Slow rotation and feed while entering to the pre-hole
3
Maintain for 2-3 seconds and activate the cooling system
Maintain for 2-3 seconds and activate the cooling system
4
Continue drilling at recommended cutting conditions
Continue drilling at recommended cutting conditions
- Prior to using 8xD or 12xD drills, it is recommended to drill a 0.5xD pre-hole using a short or centering drill.
Enter the pre-hole at slow speed and feed until 2-5 mm from its bottom. Start the cooling system and increase rotation to recommended drilling speed. Hold for 2-3 seconds, then continue at the recommended drilling feed.
Pre-hole Adjustment
Drilling Head Mounting Procedure
Drilling Limitations
Max 0.02mm
Max 0.02mm
liter/min
Coolant Flow Rate
Drill Diameter D (mm)
Dia.
bar
Minimum Coolant Pressure
Dia.
Coolant Recommendations
Dry machining
Up to 2XD
Material Groups
The NPA21-2020's pdf file: View (PDF) or Download (ZIP)
About Us
Overview Founders Ethics Code Research & Development Production Quality Assurance Global Company REACH Global Policy Conflict Minerals ISCAR SeminarsProduct Lines
Parting & Grooving Turning Miniature Hole Making Milling Toolholding Threading Microtools Division Grades Insert WearCompany
Contact Us Terms of Use and Legal Disclaimer Privacy Statement YouTube Terms of Service Meta Quest Privacy Data PoliciesNews & Publications
New Product Announcements Catalogs Brochures Reference and User Guides Latest Articles ISCAR World Magazine Podcast Video ChannelISCAR Sustainability
ISCAR Sustainability Main Production and Environment R&D at ISCAR Social Engagement Customer and Delivery Sustainability VideoDownload ISCAR World App
