X
Our website uses cookies and other technologies to ensure you get the best browsing experience.

You can change your cookie settings at any time.

Find out more on how we use cookies.

MILLING
NPA 21/2021 INCH


A New Means for Increasing Profitability in Milling Non-Ferrous Materials


SOLIDFLASH

Highlights
ISCAR is expanding the SOLID FLASH LINE with a new 3-flute series for machining aluminum and other non-ferrous materials.



The new endmills are designed with a 45° flute, wiper flat on the face end, controlled land and polished flutes that provide fluent chip evacuation, smooth cut and superb surface finish.

The tools are coated with Ta-C (Tetrahedral Amorphous Carbon) diamond like coating, also known as DLC coating. Ta-C is considered to be the superior type among the different DLC forms and therefore provides desirable qualities such as hardness, wear-resistance and slickness, and consequently prolongs tool life significantly and diminishes chip jamming.

These properties make it ideal for machining non-ferrous materials:
  • Aluminum and Aluminum alloys with up to 12% Si content
  • Copper, Bronze, Silver, Gold, and Platinum
  • Carbon and plastic
  • Composite



The new line will contain several items covering a wide range of diameters, corner radii useable lengths and reach in 3 forms with and without an extended neck:
  • Square end with sharp cutting edge
  • Ball nose
  • Bullnose


The new line is suitable for HEM toolpaths with up to 20% stepover in roughing, semi-finishing and finishing toolpaths and can perform a ramp-down of up to 3°.


ECAI-B3-EC
3-Flute DLC Coated Endmills for Machining Aluminum and Other Non-Ferrous Materials



ECAI-B3-EC (continued)
3-Flute DLC Coated Endmills for Machining Aluminum and Other Non-Ferrous Materials



ECAI-B3-EC (continued)
3-Flute DLC Coated Endmills for Machining Aluminum and Other Non-Ferrous Materials



ECAI-B3-EC (continued)
3-Flute DLC Coated Endmills for Machining Aluminum and Other Non-Ferrous Materials



ECAI-B3-EC (continued)
3-Flute DLC Coated Endmills for Machining Aluminum and Other Non-Ferrous Materials



ECAI-B3-EC (continued)
3-Flute DLC Coated Endmills for Machining Aluminum and Other Non-Ferrous Materials



ECAI-B3-EC (continued)
3-Flute DLC Coated Endmills for Machining Aluminum and Other Non-Ferrous Materials



Cutting Conditions



EBAI-B3-EC
3-Flute DLC Coated Ball Nose Mills for Machining Aluminum and Other Non-Ferrous Materials
(1) Number of flutes


EBAI-B3-EC
3-Flute DLC Coated Ball Nose Mills for Machining Aluminum and Other Non-Ferrous Materials
(1) Number of flutes






The NPA21-2021's pdf file: View (PDF) or Download (ZIP)
© ISCAR LTD. Manufacturer of Metalworking Tools (Iscar.com) All Rights Reserved