Expanding the PENTACUT Line with New Inserts and Tools

Highlights


Products and Features

• PENTA 17 ... with the new SP chipformer is intended for machining soft materials and stainless steel.
  The 18° positive rake angle of the insert assures low cutting forces and provides easy chip breaking for low feed rates from .00078-.0023 IPR.
  The inserts are available in sizes .011”/ .019”/ .031”/ .039”.
  
  
  
  
• JETCUT square shank toolholder for PENTA 17 inserts are designed to provide high-pressure coolant of up to 4930 PSI.
  The tools have 3 coolant inlets that enable several connection options and two outlets to cool the insert from the top and bottom in the most efficient way.
  The tools are available in .393”-.984”.
  
  
  
  
• New PCADRS/LS adapters for PENTA 17 inserts are designed to provide high-pressure coolant of up to 4930 PSI. These adapters have 2 coolant outlets from the top and bottom of the tool pocket which enable efficient flow of the coolant.
  The adapters fit standard MAHR/L and MAHPR/L tools.
  
  
  
  
• PENTA 17R\L...6D/15D lead angle cutting edge inserts were designed for Parting when minimum burr size is needed. Offered with 6° and 15° lead angles.
  The inserts are available in sizes .039”\.059” and .078”.
  
  
• PENTA 27 new blanks with .393” and .590” widths were added to ISCAR’s wide PENTA 27-20FT blank (.787” width). These new blanks can be ground to special wide profiles that assure an economical price per cutting edge based on the 5 cutting edge feature. These insert blanks are intended for shallow profiling and grooving depth for square type holders PCHR\L...-27-10\15\20.
  
  
  
  
• PENTA 24 popular size inserts in IC1010 grade.
  Due to the positive sales growth of the TANG-GRIP and DO-GRIP inserts grade IC1010, this phenomenal grade has been added to the PENTA 24 line. Available in .059”, .078”, .118” widths.

Grade Features

• TiAlN coating overlays the sub-micron IC08 grade
• Recommended for general parting and grooving applications at medium to high cutting speeds and low to medium feeds
• Toughness advantages compared to grades IC908 and IC808
• The cutting parameters are the same compared to grade IC808

PCHRS/LS-17-JHP
Tools Carrying Inserts with 5 Cutting Edges for Shallow Profiling Next to High Shoulders • Use right-hand inserts on right-hand tools and vice versa




PCADRS/LS-JHP
Adapters with High-Pressure Coolant Holes for PENTACUT 17 • CDX and CUTDIA according to insert limitation
(1) Minimum cutting width
(2) Maximum cutting width
(3) Maximum overhang




PENTA 17R/L-P-RS
Lead Angle Edge Pentagonal Inserts (5 edges) for Parting Miniature Parts For PCHRS-17


PENTA 17R/L-SP-RS
Pentagonal Inserts (5 edges) with a High Positive Rake for Parting Soft Materials


PCHR/L-27-JHP-MC
Tools Carrying Pentagonal Wide Inserts for Specially Tailored Profiles


PENTAS 27 blanks
Blank Insert with 5 Wide Cutting Edges for the Production of Special Profile Contours



The NPA08 INCH-2021's pdf file: View (PDF) or Download (ZIP)