TECHKNOW

Resize
Dock/Undock
NEW FAQ ADDED
X

Drilling Inserts Wear Problems and Solutions

SOLID CARBIDE
DRILLING - INDEXABLE HEAD
DRILLING - INDEXABLE INSERTS


Type of Wear
    • ×
      Flank Wear
      Flank Wear
      Cause
      • High cutting speed
      • Low wear resistance carbide grade

      Remedy
      • Check that the correct geometry is used
      • Increase coolant pressure
      • Change to harder grade
      • Increase oil concentration percentage
      • Reduce cutting speed.*** increase feed
    • ×
      Crater Wear
      Crater Wear
      Cause
      • Excessive cutting temperatures and pressures on the top of the insert

      Remedy
      • Reduce cutting feed
      • Check that the correct geometry is used
    • ×
      Plastic Deformation
      Plastic Deformation
      Cause
      • Cutting temperature is too high

      Remedy
      • Check cutting parameters
      • Reduce cutting feed
      • Increase coolant pressure/volume
      • Use harder grade
      • Check that the correct geometry is used
    • ×
      Thermal Cracking
      Thermal Cracking
      Cause
      • Excessive variations in surface temperature, intermittent machining, or variations in coolant supply

      Remedy
      • Increase coolant pressure/volume
      • Increase oll concentration percentage
    • ×
      Corner Fracture
      Corner Fracture
      Cause
      • Caused by excessive insert wear before indexing the insert
      • The grade and geometry could be too weak for the applications
      • Excessive load on the insert
      • Built-up edge has been formed on the insert

      Remedy
      • Check radial runout
      • Reduce feed rate increase the speed
      • Check tool and part clamping rigidity
      • Check if pocket gripping force is too low, replace the holder
      • Increase coolant pressure
      • Improve jet direction in case of external coolant supply
    • ×
      Built-up Edge
      Built-up Edge
      Cause
      • Cutting zone temperature is too low
      • Negative cutting geometry
      • Machining of very sticky materials such as low-carbon steel, stainless steels, and aluminum

      Remedy
      • Increase the feed
      • Increase cutting speed
      • Increase coolant pressure
      • Check oil percentage in the coolant fluid
    • ×
      Edge Chipping
      Edge Chipping
      Cause
      • Low wear resistance carbide grade
      • Built-up edge has been formed
      • Insufficient cutting fluid

      Remedy
      • Reduce feed rate
      • Increase cutting speed
      • Increase coolant pressure
      • Improve jet direction in case of external coolant supply
      • Change to different geometry
      • Check tool and part clamping rigidity
    • ×
      Chisel Chipping
      Chisel Chipping
      Cause
      • Chisel runout is too big
      • Combine high feed & low speed

      Remedy
      • Reduce feed rate and increase the cutting speed
      • Check that chisel misalignment does not exceed 0.02mm
      • Check tool and part clamping rigidity
      • Check if pocket gripping force is too low, replace the holder
    • ×
      Corner Chipping
      Corner Chipping
      Cause
      • Radial runout is too big
      • Insufficient cutting fluid

      Remedy
      • Check radial runout
      • Reduce feed rate increase the speed
      • Check tool and part clamping rigidity
      • Check if pocket gripping force is too low, replace the holder
      • Increase coolant pressure
      • Improve jet direction in case of external coolant supply
    • ×
      Land Wear
      Land Wear
      Cause
      • Cutting speed too high
      • Low wear resistance carbide grade
      • Radial runout is too big

      Remedy
      • Check that the correct geometry is used
      • Check that T.I.R runout does not exceed 0.02mm
      • Reduce cutting speed
      • Increase coolant pressure
      • Improve jet direction in case of external coolant supply
      • Check and improve tool and part clamping rigidity
      • Check if pocket gripping force is too low, replace the tool body
    • ×
      Flank Wear
      Flank Wear
      Cause
      • High cutting speed
      • Low wear resistance carbide grade

      Remedy
      • Check that the correct geometry is used
      • Increase coolant pressure
      • Change to harder grade
      • Increase oil concentration percentage
      • Reduce cutting speed.*** increase feed
    • ×
      Crater Wear
      Crater Wear
      Cause
      • Excessive cutting temperatures and pressures on the top of the insert.

      Remedy

      • Reduce cutting feed
      • Check that the correct geometry is used
    • ×
      Plastic Deformation
      Plastic Deformation
      Cause
      • Cutting temperature is too high

      Remedy
      • Check cutting parameters
      • Reduce cutting feed
      • Increase coolant pressure/volume
      • Use harder grade
      • Check that the correct geometry is used
    • ×
      Thermal Cracking
      Thermal Cracking
      Cause
      • Excessive variations in surface temperature, intermittent machining, or variations in coolant supply

      Remedy
      • Increase coolant pressure/volume
      • Increase oll concentration percentage
    • ×
      Corner Fracture
      Corner Fracture
      Cause
      • Caused by excessive insert wear before indexing the insert
      • The grade and geometry could be too weak for the applications
      • Excessive load on the insert
      • Built-up edge has been formed on the insert

      Remedy
      • Check radial runout
      • Reduce feed rate increase the speed
      • Check tool and part clamping rigidity
      • Check if pocket gripping force is too low, replace the holder
      • Increase coolant pressure
      • Improve jet direction in case of external coolant supply
    • ×
      Built-up Edge
      Built-up Edge
      Cause
      • Cutting zone temperature is too low
      • Negative cutting geometry
      • Machining of very sticky materials such as low-carbon steel, stainless steels, and aluminum

      Remedy
      • Increase the feed
      • Increase cutting speed
      • Increase coolant pressure
      • Check oil percentage in the coolant fluid
    • ×
      Edge chipping
      Edge chipping
      Cause
      • Low wear resistance carbide grade
      • Built-up edge has been formed
      • Insufficient cutting fluid

      Remedy
      • Reduce feed rate
      • Increase the speed
      • Increase coolant pressure
      • Improve jet direction in case of external coolant supply
      • Change to different geometry
      • Check tool and part clamping rigidity
    • ×
      Chisel Chipping
      Chisel Chipping
      Cause
      • Chisel runout is too big
      • Combine high feed & low speed

      Remedy
      • Reduce feed rate and increase the cutting speed
      • Check that chisel misalignment does not exceed 0.02mm
      • Check tool and part clamping rigidity
      • Check if pocket gripping force is too low, replace the holder
    • ×
      Land Wear
      Land Wear
      Cause
      • Cutting speed too high
      • Low wear resistance carbide grade
      • Radial runout is too big

      Remedy
      • Check that the correct geometry is used
      • Check that T.I.R runout does not exceed 0.02mm
      • Reduce cutting speed
      • Increase coolant pressure
      • Improve jet direction in case of external coolant supply
      • Check and improve tool and part clamping rigidity
      • Check if pocket gripping force is too low, replace the tool body
    • ×
      Corner Chipping
      Corner Chipping
      Cause
      • Radial runout is too big
      • Insufficient cutting fluid

      Remedy
      • Check radial runout
      • Reduce feed rate increase the speed
      • Check tool and part clamping rigidity
      • Check if pocket gripping force is too low, replace the holder
      • Increase coolant pressure
      • Improve jet direction in case of external coolant supply
    • ×
      Flank Wear
      Flank Wear
      Cause
      • High cutting speed
      • Low wear resistance carbide grade

      Remedy
      • Reduce cutting speed
      • Increase coolant pressure/volume
      • Choose better wear resistance grade
      • Increase oil concentration percentage
    • ×
      Crater Wear
      Crater Wear
      Cause
      • Excessive cutting temperatures and pressures on the top of the insert

      Remedy
      outer insert:
      • Reduce cutting speed
      • Choose better wear resistance grade
      • Change to different chipbreaker

      inner insert:
      • Reduce feed rate
      • Change to different chipbreaker
    • ×
      Plastic Deformation
      Plastic Deformation
      Cause
      • Cutting temperature is too high

      Remedy
      • Reduce feed rate
      • Choose better wear resistance grade
      • Increase coolant pressure/volume
      • Choose a different chipbreaker
    • ×
      Thermal Cracking
      Thermal Cracking
      Cause
      • Excessive variations in surface temperature, intermittent machining, or variations in coolant supply

      Remedy
      • Use tougher grade
      • Increase coolant pressure/volume
    • ×
      Edge Fracture
      Edge Fracture
      Cause
      • Caused by excessive insert wear before indexing the insert
      • The grade and geometry could be too weak for the applications
      • Excessive load on the insert
      • Built-up edge has been formed on the insert

      Remedy
      • Use tougher grade
      • Reduce feed rate
      • Increase coolant pressure/volume
      • Change to different chipbreaker
    • ×
      Built-up Edge
      Built-up Edge
      Cause
      • Cutting zone temperature is too low
      • Negative cutting geometry
      • Machining of very sticky materials such as low-carbon steel, stainless steels, and aluminum

      Remedy
      • Increase cutting speed
      • Change to different chipbreaker
      • Reduce feed rate
      • Increase coolant pressure/volume
    • ×
      Chipping
      Chipping
      Cause
      • Low wear resistance carbide grade
      • Built-up edge has been formed
      • Insufficient cutting fluid

      Remedy
      • Choose tougher grade
      • Reduce feed
      • Increase coolant pressure/volume
      • Change to different chipbreaker
© ISCAR LTD. Manufacturer of Metalworking Tools (Iscar.com) All Rights Reserved