Page 24 - Multi-Master Catalog

MM TS-H
Interchangeable Solid Carbide T-Slot Milling Heads with Various Corner Radius

W
Ts r
D Tmax

W

Dimensions

IC328
Designation D-0.05 W ±0.02 Tmax Z r Ts Key
MM TS135-H30D-06T05 13.50 3.00 2.65 6 0.40 T05 l T-20/3*
MM TS135-H40D-06T05 13.50 4.00 2.65 6 0.40 T05 l T-20/3*
MM TS165-H40A-06T05 16.50 4.00 4.25 6 0.20 T05 l T-20/3*
MM TS160-H20D-06T06 16.00 2.00 3.00 6 0.40 T06 l T-20/3*
MM TS160-H30D-06T06 16.00 3.00 3.00 6 0.40 T06 l T-25/3*
MM TS160-H40D-06T06 16.00 4.00 3.00 6 0.40 T06 l T-25/3*
MM TS165-H20D-06T06 16.50 2.00 3.25 6 0.40 T06 l T-20/3*
MM TS165-H30D-06T06 16.50 3.00 3.25 6 0.40 T06 l T-25/3*
MM TS165-H40D-06T06 16.50 4.00 3.25 6 0.40 T06 l T-25/3*
MM TS195-H60A-06T06 19.50 6.00 4.45 6 0.20 T06 l T-25/3*
MM TS225-H60A-06T06 22.50 6.00 5.95 6 0.20 T06 l T-25/3*
MM TS195-H40D-06T08 19.50 4.00 3.45 6 0.40 T08 l T-30/3 L*
MM TS195-H50D-06T08 19.50 5.00 3.45 6 0.40 T08 l T-30/3 L*
MM TS195-H60D-06T08 19.50 6.00 3.45 6 0.40 T08 l T-30/3 L*
MM TS225-H40D-06T08 22.50 4.00 4.90 6 0.40 T08 l T-40/3 L*
MM TS225-H50D-06T08 22.50 5.00 4.95 6 0.40 T08 l T-40/3 L*
MM TS225-H60D-06T08 22.50 6.00 4.95 6 0.40 T08 l T-40/3 L*
MM TS225-H80D-06T08 22.50 8.00 4.95 6 0.40 T08 l T-40/3 L*
MM TS250-H50D-06T08 25.00 5.00 5.90 6 0.40 T08 l T-50/3 L*
MM TS250-H60D-06T08 25.00 6.00 5.90 6 0.40 T08 l T-50/3 L*
MM TS250-H80D-06T08 25.00 8.00 5.90 6 0.40 T08 l T-50/3 L*
MM TS250-H50D-06T10 25.00 5.00 4.30 6 0.40 T10 l T-50/3 L*
MM TS250-H60D-06T10 25.00 6.00 4.30 6 0.40 T10 l T-50/3 L*
MM TS250-H80D-06T10 25.00 8.00 4.30 6 0.40 T10 l T-50/3 L*
• For tightening torques and clamping instructions, see page 8. • Do not apply lubricant to the threaded connection • For shanks, see pages 63-71.
• For user guide, see pages 72-84.
• Inserts in 5 mm and wider feature chip splitting edges
* (Optional, should be ordered separately)

22 ISCAR