Page 27 - Multi-Master Catalog

MM GRIT-16K/P,18K/P Performance
Engineered for
Interchangeable Solid Carbide Small Diameter Groove Milling Heads
MAXIMUM
MULTI-MASTER
D Ts W
r
Dmin
Tmax

Tmax
W

Dimensions

IC528
Designation D W ±0.02 Tmax Z r D min (2) Ts
MM GRIT 16K-1.50-0.10 15.70 1.50 2.80 3 0.10 16.00 T06 l
MM GRIT 16P-1.50-0.10 15.70 1.50 2.80 3 0.10 16.00 T06 l
MM GRIT 16K-1.57-0.20 15.70 1.57 2.80 3 0.20 16.00 T06 l
MM GRIT 16K-2.00-0.20 15.70 2.00 2.80 3 0.20 16.00 T06 l
MM GRIT 16P-2.20-1.10 15.70 2.20 2.80 3 1.10 16.00 T06 l
MM GRIT 16K-2.39-0.20 15.70 2.39 2.80 3 0.20 16.00 T06 l
MM GRIT 16K-2.50-0.20 15.70 2.50 2.80 3 0.20 16.00 T06 l
MM GRIT 16K-3.00-0.20 15.70 3.00 2.80 3 0.20 16.00 T06 l
MM GRIT 16P-3.00-0.20 15.70 3.00 2.80 3 0.20 16.00 T06 l
MM GRIT 16K-3.17-0.20 15.70 3.17 2.80 3 0.20 16.00 T06 l
MM GRIT 18K-1.20-0.05 (1) 17.70 1.20 3.80 3 0.05 18.00 T06 l
MM GRIT 18P-1.20-0.60 17.70 1.20 3.80 3 0.60 18.00 T06 l
MM GRIT 18K-1.40-0.05 (1) 17.70 1.40 3.80 3 0.05 18.00 T06 l
MM GRIT 18K-1.50-0.10 17.70 1.50 3.80 3 0.10 18.00 T06 l
MM GRIT 18K-1.57-0.20 17.70 1.57 3.80 3 0.20 18.00 T06 l
MM GRIT 18K-1.70-0.05 (1) 17.70 1.70 3.80 3 0.05 18.00 T06 l
MM GRIT 18K-2.00-0.20 17.70 2.00 3.80 3 0.20 18.00 T06 l
MM GRIT 18P-2.00-1.00 17.70 2.00 3.80 3 1.00 18.00 T06 l
MM GRIT 18P-2.20-1.10 17.70 2.20 3.80 3 1.10 18.00 T06 l
MM GRIT 18K-2.39-0.20 17.70 2.39 3.80 3 0.20 18.00 T06 l
MM GRIT 18K-2.50-0.20 17.70 2.50 3.80 3 0.20 18.00 T06 l
MM GRIT 18K-3.00-0.20 17.70 3.00 3.80 3 0.20 18.00 T06 l
MM GRIT 18P-3.00-1.50 17.70 3.00 3.80 3 1.50 18.00 T06 l
MM GRIT 18K-3.17-0.20 17.70 3.17 3.80 3 0.20 18.00 T06 l
• Recommended for O-rings and retaining rings. • MM EGR clamping key is supplied with each MM GRT... shank. • Modification options on request. • Do not
apply lubricant to the threaded connection. • Tightening torque: 1000 N x cm • For clamping instructions, see page 8. • For user guide, see pages 72-84. •
For shanks, see pages 63-71. • K - For general steel machining. • P - Positive geometry for soft and gummy materials.
(1) For circle clips according to DIN 471/472 and ANSI B27.7M (2) Minimum bore diameter

Spare Parts
Designation Clamping Key
MM GRIT-16K/P,18K/P MM EGR 16-18*
* (Optional, should be ordered separately)

25