Page 60 - Multi-Master Catalog

MM ERS
Interchangeable Solid Carbide Rough Milling Heads, for High Metal Removal Rates

D2
Ts Rd°
Chx45°
De9

ap Ha°
l

Recommended
Dimensions
Machining Data

IC908 fz
Designation D Flute ap Ts D2 l Ch Ha° Rd° (mm/t)
MM ERS080B05-4T05 8.00 4 5.00 T05 7.70 10.00 0.25 45.0 90.0 l 0.03-0.08
MM ERS080B09-4T05 8.00 4 9.00 T05 7.70 15.00 0.25 45.0 90.0 l 0.03-0.08
MM ERS100B07-4T06 10.00 4 7.00 T06 9.60 13.00 0.30 45.0 90.0 l 0.03-0.09
MM ERS120B09-4T08 12.00 4 9.00 T08 11.70 16.50 0.35 45.0 90.0 l 0.04-0.10
MM ERS120B09-4T08H (1) 12.00 4 9.00 T08 11.70 16.50 0.35 45.0 90.0 l 0.04-0.10
MM ERS120B09-4T08I (2) 12.00 4 9.00 T08 11.70 16.50 0.35 45.0 90.0 l 0.04-0.11
MM ERS120B14-4T08 12.00 4 14.00 T08 11.70 23.00 0.35 45.0 90.0 l 0.04-0.10
MM ERS.500B37-4T08 12.70 4 9.50 T08 12.40 16.50 0.35 45.0 90.0 l 0.04-0.10
MM ERS160B12-5T10 16.00 5 12.00 T10 15.30 20.50 0.40 45.0 7.0 l 0.04-0.10
MM ERS160B12-5T10H (1) 16.00 5 12.00 T10 15.30 20.50 0.40 45.0 7.0 l 0.04-0.10
MM ERS200B15-6T12 20.00 6 15.00 T12 18.30 25.50 0.40 45.0 3.0 l 0.05-0.11
MM ERS250B22-6T15 25.00 6 22.00 T15 23.90 37.00 0.50 45.0 3.0 l 0.05-0.11
MM ERS1.00B86-6T15 25.40 6 22.00 T15 23.90 37.00 0.50 45.0 3.0 l 0.04-0.10
• For shanks, see pages 63-71 • For Clamping keys (should be ordered separately), tightening torques and clamping instructions, see page 8. • Do not apply
lubricant to the threaded connection. • For user guide, see pages 72-84.
(1) With a central coolant hole (2) With coolant holes directed to each flute

MM ERA
Interchangeable Solid Carbide Rough Milling Heads, for Machining Aluminum
Rd°

r Ts

De8 D2

ap Ha
l
ALUMINUM
Recommended
Dimensions
Machining Data

fz
Designation D Flute ap r Ts D2 l Ha° IC08 (mm/t)
MM ERA080B05R0.2-3T05 8.00 3 5.00 0.20 T05 7.70 10.00 45.0 l 0.03-0.15
MM ERA100B06R0.2-3T06 10.00 3 6.00 0.20 T06 9.60 13.00 45.0 l 0.05-0.20
MM ERA120B08R0.2-3T08 12.00 3 8.00 0.20 T08 11.70 16.50 45.0 l 0.07-0.22
MM ERA160B10R0.2-3T10 16.00 3 10.00 0.20 T10 15.30 20.50 45.0 l 0.07-0.25
MM ERA200B12R0.2-3T12 20.00 3 12.00 0.20 T12 18.30 25.50 45.0 l 0.07-0.25
MM ERA250B19R0.2-3T15 25.00 3 19.00 0.20 T15 23.90 37.00 45.0 l 0.07-0.25
• For shanks, see pages 63-71 • For Clamping keys (should be ordered separately), tightening torques and clamping instructions, see page 8. • Do not apply
lubricant to the threaded connection. • For user guide, see pages 72-84.

58 ISCAR