Page 65 - Multi-Master Catalog

MM S-A (stepped shanks) Performance
Engineered for
Stepped Cylindrical Shanks for Interchangeable Milling Heads
MAXIMUM
MULTI-MASTER
MM S-A-L...-H
Tsi

D2 d
MM S-A-L...-CH
h
L1
L

Designation Tsi d D2 h L1 L Shank m. (1) Coolant RPM max (2) Kg
MM S-A-L050-C08-T04 T04 8.00 5.80 9.90 14.0 50.00 S N 60000 0.02
MM S-A-L060-C08-T05 T05 8.00 7.60 12.50 15.0 60.00 S N 60000 0.02
MM S-A-L070-C08-T05-C T05 8.00 7.60 18.60 20.0 70.00 C N 60000 0.04
MM S-A-L070-C08-T05-W T05 8.00 7.60 18.90 20.0 70.00 W N 60000 0.06
MM S-A-L090-C08-T05-C T05 8.00 7.60 38.60 40.0 90.00 C N 50160 0.06
MM S-A-L090-C08-T05-W T05 8.00 7.60 38.90 40.0 90.00 W N 36090 0.07
MM S-A-L110-C08-T05-C T05 8.00 7.60 57.90 60.0 110.00 C N 30600 0.07
MM S-A-L110-C08-T05-W T05 8.00 7.60 58.90 60.0 110.00 W N 21060 0.09
MM S-A-L070-C10-T06-C T06 10.00 9.60 18.50 20.0 70.00 C N 54900 0.07
MM S-A-L070-C10-T06-W-H T06 10.00 9.60 18.90 20.0 70.00 W Y 60000 0.08
MM S-A-L075-C10-T06 T06 10.00 9.55 17.40 20.0 75.00 S N 60000 0.05
MM S-A-L075-C10-T06-H T06 10.00 9.55 18.80 20.0 75.00 S Y 53940 0.04
MM S-A-L090-C10-T06-C T06 10.00 9.60 38.50 40.0 90.00 C N 55170 0.06
MM S-A-L090-C10-T06-W T06 10.00 9.55 17.20 20.0 90.00 W N 41670 0.12
MM S-A-L090-C10-T06-W-H T06 10.00 9.60 39.00 40.0 90.00 W Y 40860 0.10
MM S-A-L110-C10-T06-C T06 10.00 9.60 57.90 60.0 110.00 C N 34530 0.11
MM S-A-L110-C10-T06-W-H T06 10.00 9.60 59.00 60.0 110.00 W Y 24840 0.12
MM S-A-L150-C10-T06-C T06 10.00 9.60 98.50 100.0 150.00 C N 16620 0.15
MM S-A-L070-C12-T08-C T08 12.00 11.50 17.90 20.0 70.00 C N 60000 0.10
MM S-A-L070-C12-T08-W-H T08 12.00 11.50 18.70 20.0 70.00 W Y 60000 0.11
MM S-A-L090/14-C12-T08-CH T08 12.00 11.50 13.00 14.0 90.00 S Y - 0.12
MM S-A-L090-C12-T08 T08 12.00 11.50 13.30 16.0 90.00 S N 43000 0.10
MM S-A-L070/020C12T08C-CH T08 12.00 11.50 18.00 20.0 90.00 C Y - 0.08
MM S-A-L090-C12-T08-C T08 12.00 11.50 39.00 40.0 90.00 C N 43050 0.12
MM S-A-L090-C12-T08-H T08 12.00 11.50 38.70 40.0 90.00 S Y 41040 0.08
MM S-A-L090-C12-T08-W-H T08 12.00 11.50 38.70 40.0 90.00 W Y 49800 0.15
MM S-A-L090/040C12T08C-CH T08 12.00 11.50 38.00 40.0 90.00 C Y - 0.11
MM S-A-L090/42-C12-T08-CH T08 12.00 11.50 41.00 42.0 90.00 S Y 41010 0.07
MM S-A-L110-C12-T08-W T08 12.00 11.50 17.00 20.0 110.00 W N 31350 0.09
MM S-A-L110-C12-T08-C T08 12.00 11.50 57.00 60.0 110.00 C N 41040 0.16
MM S-A-L110-C12-T08-W-H T08 12.00 11.50 58.70 60.0 110.00 W Y 30210 0.18
MM S-A-L110/060C12T08C-CH T08 12.00 11.50 58.00 60.0 110.00 C Y - 0.12
MM S-A-L130-C12-T08-C T08 12.00 11.50 77.80 80.0 130.00 C N 27960 0.19
MM S-A-L130-C12-T08-W-H T08 12.00 11.50 78.70 80.0 130.00 W Y 20100 0.21
MM S-A-L130/080C12T08C-CH T08 12.00 11.50 78.00 80.0 130.00 C Y - 0.17
• Do not apply lubricant to the threaded connection.
(1) S-steel, C-carbide, W-tungsten (2) The maximum RPM must be calculated. Divide the listed max. RPM by the number of flutes (on the milling head) being used.

63