Page 66 - Multi-Master Catalog

MM S-A (stepped shanks) (continued)
Stepped Cylindrical Shanks for Interchangeable Milling Heads

MM S-A-L...-H
Tsi

D2 d
MM S-A-L...-CH
h
L1
L

Designation Tsi d D2 h L1 L Shank m. (1) Coolant RPM max (2) Kg
MM S-A-L070-C16-T10-W-H T10 16.00 15.20 18.20 20.0 70.00 W Y 60000 0.21
MM S-A-L090-C16-T10-C T10 16.00 15.20 38.00 40.0 90.00 C N 60000 0.21
MM S-A-L090-C16-T10-W-H T10 16.00 15.20 38.20 40.0 90.00 W Y 57510 0.27
MM S-A-L100-C16-T10 T10 16.00 15.20 16.30 20.0 100.00 S N 39000 0.16
MM S-A-L100-C16-T10-H T10 16.00 15.20 48.00 50.0 100.00 S Y 37140 0.13
MM S-A-L100/42-C16-T10-CH T10 16.00 15.20 40.20 42.0 100.00 S Y 38040 0.14
MM S-A-L110-C16-T10-C T10 16.00 15.20 58.00 60.0 110.00 C N 47010 0.27
MM S-A-L110-C16-T10-W-H T10 16.00 15.20 58.20 60.0 110.00 W Y 36030 0.33
MM S-A-L130-C16-T10-C T10 16.00 15.20 77.40 80.0 130.00 C N 33510 0.32
MM S-A-L130-C16-T10-W-H T10 16.00 15.20 78.20 80.0 130.00 W Y 24450 0.39
MM S-A-L150-C16-T10-C T10 16.00 15.20 97.40 100.0 150.00 C N 24660 0.37
MM S-A-L150-C16-T10-W-H T10 16.00 15.20 98.20 100.0 150.00 W Y 17610 0.45
MM S-A-L090-C20-T12-C T12 20.00 18.30 37.00 40.0 90.00 C N 60000 0.32
MM S-A-L090-C20-T12-W-H T12 20.00 18.30 36.90 40.0 90.00 W Y 60000 0.41
MM S-A-L120-C20-T12 T12 20.00 18.30 20.30 25.0 120.00 S N 36000 0.27
MM S-A-L120-C20-T12-H T12 20.00 18.30 66.70 70.0 120.00 S Y 32160 0.25
MM S-A-L130-C20-T12-C T12 20.00 18.30 77.20 80.0 130.00 C N 42360 0.47
MM S-A-L130-C20-T12-W-H T12 20.00 18.30 76.90 80.0 130.00 W Y 31650 0.59
MM S-A-L170-C20-T12-C T12 20.00 18.30 97.20 100.0 170.00 C N 25170 0.63
MM S-A-L200-C20-T12-C T12 20.00 18.30 116.50 120.0 200.00 C N 17790 0.76
MM S-A-L200-C20-T12-W-H T12 20.00 18.30 116.90 120.0 200.00 W Y 12540 0.92
MM S-A-L120-C25-T15-C T15 25.00 23.90 57.50 60.0 120.00 C N 49400 0.64
MM S-A-L120-C25-T15-W-H T15 25.00 23.90 58.00 60.0 120.00 W Y 41700 0.89
MM S-A-L135-C25-T15 T15 25.00 23.90 33.00 35.0 135.00 S N 28290 0.47
MM S-A-L135/35-C25-T15-CH T15 25.00 23.90 33.00 35.0 135.00 S Y 28230 0.42
MM S-A-L170-C25-T15-C T15 25.00 23.90 98.00 100.0 170.00 C N 27360 0.96
MM S-A-L175-C25-T15 T15 25.00 23.90 62.70 65.0 175.00 S N 16890 1.00
MM S-A-L250-C25-T15-C T15 25.00 23.90 148.00 150.0 250.00 C N 12690 1.45
• Do not apply lubricant to the threaded connection.
(1) S-steel, C-carbide, W-tungsten (2) The maximum RPM must be calculated. Divide the listed max. RPM by the number of flutes (on the milling head) being used.

MM TS-A
Cylindrical Shanks for Interchangeable Milling Heads

Tsi
MM TS-A-L...-H

D2 d

L

Designation Tsi d D2 L Coolant RPM max (1) Kg
MM TS-A-L070-C08-T05 T05 8.00 8.00 70.00 N 60000 0.03
MM TS-A-L080-C10-T06 T06 10.00 10.00 80.00 N 47400 0.07
MM TS-A-L080-C10-T06-H T06 10.00 10.00 80.00 Y 46920 0.04
MM TS-A-L090-C12-T08 T08 12.00 12.00 90.00 N 43110 0.12
MM TS-A-L090-C12-T08-H T08 12.00 12.00 90.00 Y 42780 0.08
MM TS-A-L100-C16-T10 T10 16.00 16.00 100.00 N 39420 0.17
MM TS-A-L100-C16-T10-H T10 16.00 16.00 100.00 Y 39210 0.14
• Do not apply lubricant to the threaded connection
(1) The actual maximum RPM should be calculated by dividing the listed RPM max by the number of the heads flutes being used.

64 ISCAR