Page 22 - Parting 4 Productivity inch

TAG N-MF CW RE 7°
Single-Ended Inserts for Parting
Grooving and Slitting Stainless
and Alloy Steel at Medium Feed

Recommended
Dimensions Tough 1 Hard
Machining Data

IC830 IC1030 IC5400 IC1010 IC808 f groove
Designation CW CWTOL (1) RE (IPR)
TAG N2MF .079 .0020 .008 • • • • • .0016-.0047
TAG N3MF .118 .0020 .008 • • • • • .0024-.0071
TAG N4MF .157 .0020 .010 • • • • • .0027-.0087
TAG N5MF .197 .0020 .010 • • .0031-.0098
(1) Cutting width tolerance (+/-)

W C
TAG N-C/W/M
Single-Ended Inserts for Parting, CW RE
Grooving and Slitting Bars, Hard 7º
Materials and Tough Applications

Recommended
Dimensions Tough 1 Hard
Machining Data

IC830 IC928 IC1030 IC5400 IC1010 IC808 IC908 IC30N IC807 f groove
Designation CW CWTOL (3) RE IC20 (IPR)
TAG N1.4C .055 .0020 .0063 • .0016-.0039
TAG N1.6C .063 .0020 .0063 • • .0016-.0055
TAG N2C .079 .0020 .0079 • • • • • • • .0020-.0063
TAG N2.4C .094 .0016 .0063 • • .0024-.0071
TAG N3CB (1) .118 .0020 .0138 • • .0047-.0118
TAG N3C .120 .0020 .0079 • • • • • • • • • • .0039-.0098
TAG N3M (2) .120 .0020 .0079 • • .0024-.0071
TAG N3W .120 .0020 .0079 • • .0039-.0098
TAG N4C .157 .0020 .0094 • • • • • • • • • .0039-.0118
TAG N4CB (1) .157 .0020 .0157 • • .0039-.0130
TAG N4M (2) .157 .0020 .0094 • • .0024-.0079
TAG N4W .157 .0020 .0094 • • .0039-.0118
TAG N4.8C .189 .0020 .0118 • • .0039-.0138
TAG N5C .199 .0020 .0098 • • • .0039-.0138
TAG N6.3C .248 .0039 .0138 • • .0059-.0157
TAG N7W .276 .0039 .0197 • • .0071-.0157
TAG N8C .315 .0039 .0197 • • .0079-.0276
TAG N9.5C .374 .0039 .0197 • • .0098-.0315
TAG N9.5W .374 .0039 .0197 • • .0087-.0315
TAG N12.7W .500 .0039 .0335 • • .0118-.0315
• Feed values for grade IC20 should be decreased by 50%
Larger corner radii for interrupted cut and high feed applications
(1)
Similar to C-type, but with a modified edge; improved chip control at medium feeds
(2)
Cutting width tolerance (+/-)
(3)

20