Page 23 - Parting 4 Productivity inch

CW
TAG N-LF RE
Single-Ended Inserts for 7°
Parting, Grooving and
Slitting Stainless Steel

Recommended
Dimensions Tough 1 Hard
Machining Data

IC830 IC1030 IC5400 IC1010 IC808 f groove
Designation CW RE CWTOL (1) RETOL (2) (IPR)
TAG N2LF .079 .008 .0016 .0012 • • • • • .0012-.0031
TAG N3LF .120 .008 .0016 .0012 • • • • • .0016-.0039
Cutting width tolerance (+/-)
(1)
Corner radius tolerance (+/-)
(2)

CW
TAG N-UT RE
Single-Sided Inserts for Parting, 7°
Grooving & Slitting at Low
Feeds on Cr-Ni Alloys, Ductile
Materials & Low Carbon Steel

Recommended
Dimensions Tough 1 Hard Machining Data

IC830 IC808 IC908 f groove
Designation CW RE CWTOL (1) RETOL (2) (IPR)
TAG N2UT .079 .0079 .0016 .0016 • • • .0012-.0039
TAG N3UT .118 .0118 .0016 .0016 • • .0016-.0047
TAG N4UT .157 .0118 .0016 .0016 • .0020-.0059
TAG N5UT .197 .0118 .0016 .0016 • .0020-.0071
TAG N6UT .236 .0335 .0016 .0016 • .0024-.0087
(1) Cutting width tolerance (+/-)
(2) Corner radius tolerance (+/-)

10°
TAG N-A CW RE
Single-Ended Inserts for Parting, 7°
Grooving and Slitting Aluminum

Recommended
Dimensions
Machining Data

f groove
Designation CW RE CWTOL (1) RETOL (2) IC20 (IPR)
TAG N2A .079 .008 .0000 .0020 • .0008-.0039
TAG N3A .120 .008 .0000 .0020 • .0012-.0055
TAG N4A .159 .009 .0000 .0020 • .0012-.0063
(1) Cutting width tolerance (+/-)
(2) Corner radius tolerance (+/-)
21