Page 113 - ISCAR FACE GROOVING LINES
P. 113
CW RE FACE GROOVE-TURN
TNF-P-IQ
Face Grooving Single-Ended
Inserts for Machining Steel
METRIC Recommended
Dimensions Machining Data
f face-groove
Designation CW RE CWTOL(1) IC808
(mm/rev)
TNF 3P-IQ 3.00 0.30 0.05
TNF 4P-IQ 4.00 0.25 0.05 • 0.10-0.15
TNF 5P-IQ 5.00 0.35 0.05 • 0.10-0.15
TNF 6P-IQ 6.00 0.35 0.05 • 0.12-0.20
• 0.12-0.20
INCH
Recommended
Dimensions Machining Data
f face-groove
Designation CW RE CWTOL(1) IC808
.0020 (IPR)
TNF 3P-IQ .118 .0118 .0020
TNF 4P-IQ .157 .0098 .0020 • .0039-.0059
.197 .0138 .0020 • .0039-.0059
TNF 5P-IQ .236 .0138 • .0047-.0079
TNF 6P-IQ CW RE • .0047-.0079
• For user guide, see pages 161-173 Recommended
(1) Cutting width tolerance (+/-) Machining Data
For tools, see pages: TNFFA-IQ (110) • TNFFH-IQ (109) • TNFPAD-XL-JHP (113) f face-groove
TNF-M-IQ (mm/rev)
Face Grooving Single-Ended
Inserts for Machining Stainless • 0.08-0.10
Steel and High Temperature Alloys • 0.08-0.12
• 0.12-0.20
METRIC • 0.12-0.20
Dimensions
Recommended
Designation CW RE CWTOL(1) IC808 Machining Data
f face-groove
TNF 3M-IQ 3.00 0.30 0.05
TNF 4M-IQ 4.00 0.25 0.05 (IPR)
TNF 5M-IQ 5.00 0.35 0.05
TNF 6M-IQ 6.00 0.35 0.05 • .0031-.0039
• .0031-.0047
INCH • .0047-.0079
• .0047-.0079
Dimensions
Designation CW RE CWTOL(1) IC808
TNF 3M-IQ .118 .0118 .0020
TNF 4M-IQ .157 .0098 .0020
.197 .0138 .0020
TNF 5M-IQ .236 .0138 .0020
TNF 6M-IQ
• For user guide, see pages 161-173
(1) Cutting width tolerance (+/-)
For tools, see pages: TNFFA-IQ (110) • TNFFH-IQ (109) • TNFPAD-XL-JHP (113)
111
